scott12180 Posted November 4, 2010 Share Posted November 4, 2010 There is currently a 1935 Packard 1200 Sedan on eBay with a late 1980's White Post restoration. The seller claims that the car has a 3.0 to 1 set of high speed gears. I asked if they were really THREE to one, and he insists that's what was put into it. First of all, was a 3:1 ratio ever available in the 1980's? Second, could a car of that size even handle only 3:1 ?? Seems awfully tall. Thanks -- Scott Link to comment Share on other sites More sharing options...
Guest Brand O Posted November 5, 2010 Share Posted November 5, 2010 That is really high if it is still stock trans and horse power....and did they adapt late model gears into a Packard diff or is the rear end housing stock? Link to comment Share on other sites More sharing options...
motoringicons Posted November 8, 2010 Share Posted November 8, 2010 High speed gears have been made for these but 3:1 is REALLY tall and I doubt could function on a car like that. From memory, I believe something around a 4:1 was made for these by Phil Bray. Link to comment Share on other sites More sharing options...
Su8overdrive Posted November 18, 2010 Share Posted November 18, 2010 I'm a big fan of long legs in old cars, most of which were geared like tractors for the luxury of high gear flexibility, and the road conditions of the '30s. You may recall the expression "going like 60." There are aftermarket overdrives available like Gear Vendors in SoCal, so you could retain the original stump-pulling rear cog yet cruise without duress. A 3.0:1 axle ratio in such a heavy car would be murder on the pressure plate. I put a non-overdrive rear axle in my '47 Packard Super Clipper which came from the factory with overdrive for a taller overall ratio in overdrive. A friend who worked in postwar Hudson and Packard dealerships said this was occasionally done after the war for serious distance drivers on the steadily improving roads. G'luck. Link to comment Share on other sites More sharing options...
Dave Mitchell Posted November 28, 2010 Share Posted November 28, 2010 It is much more likely that it is a 3.58 set that was made by Phil Hill. The 734 speedster series used a 3.3 I think, which is the closest that I know of, but those are very rare. If you are in flat country, it will probably do it since that is a short wheelbase car. I have driven a 1401 with a 3.58 and it was fine. If you are in the hills, you probably would want at least a Super for that. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now