Dave 38 Posted January 6, 2015 Author Share Posted January 6, 2015 OK, been working on the car.Got the back bottom finished.Went down to Dodge City with my friend Jim.And we spent the day With Dave ,Had a great time.Going back as soon as I get some time.I got the banjo wheel and some tail light lens from dave.I just finished restoring the wheel .Thanks Dave !This week I'll be woodgraining the dash and moldings.I'll post photos of them when finished.I have also finished the hand brake, steering tube,wind wings.Iam trying to get all the small stuff done now.P.S. if you need something for your Dodge or Plymouth,Mopar Call Dave at Dodge City Vintage. Link to comment Share on other sites More sharing options...
Dave 38 Posted January 17, 2015 Author Share Posted January 17, 2015 Finished the woodgraining today. Came out nice.Next I'll wet sand with 1500 and then 2 or 3 more coats of clear. Up next is finish up rear springs and bushings and install new rearend. Then run brake lines. Cheers Link to comment Share on other sites More sharing options...
nearchoclatetown Posted January 17, 2015 Share Posted January 17, 2015 Turned out really good, Dave. Did you use a Grain-It kit? Link to comment Share on other sites More sharing options...
keiser31 Posted January 17, 2015 Share Posted January 17, 2015 BEAUTIFUL! Link to comment Share on other sites More sharing options...
Dave 38 Posted January 17, 2015 Author Share Posted January 17, 2015 Thanks, In the olden days I used an old paint brushs, sponge, #2 pencil, cheese cloth, cellophane to do the graining. Yes Doug, It's so nice to work with it. Still takes a lot of time, but not as much. The glove box will be the hardest part. But it will payoff in the end. And Iam not even restoring this car to stock. Link to comment Share on other sites More sharing options...
nearchoclatetown Posted January 17, 2015 Share Posted January 17, 2015 JayDee, the owner of Grain-It used to be my neighbor at Hershey flea market. He's a good guy and a HAMBer. Link to comment Share on other sites More sharing options...
Dave 38 Posted January 17, 2015 Author Share Posted January 17, 2015 Ya Doug ,He is a very nice guy. We had nice talk ,said to call if I had any questions. And wanted pix of the parts after. Link to comment Share on other sites More sharing options...
Dave 38 Posted March 1, 2015 Author Share Posted March 1, 2015 Had the day off yesterday.So I worked on the Boznetic Coupe.Metal finished the left rear fender.Sunday I'll fit the right rear and do the same. It's coming out nice. Link to comment Share on other sites More sharing options...
keiser31 Posted March 1, 2015 Share Posted March 1, 2015 Looking GOOD! Link to comment Share on other sites More sharing options...
Machinist_Bill Posted March 1, 2015 Share Posted March 1, 2015 You have some skills my friend! Link to comment Share on other sites More sharing options...
Dave 38 Posted March 8, 2015 Author Share Posted March 8, 2015 Went out to work on the Boznetic coupe today,but the Beast said clean me up.So out in the sun it came. Man was it a dusty. I think I'll fire her up this week.OH, and I did get some work done on the coupe.But not much. Link to comment Share on other sites More sharing options...
Dave 38 Posted February 14, 2016 Author Share Posted February 14, 2016 Doing my last fitting of the sheet metal . And then primer & paint. Hope to have color on in a month or so. Going down to see Dave at Dodge city soon. He thinks he has what I need. Nice drive down HWY 49 to Jamestown. Cheers Link to comment Share on other sites More sharing options...
Dave 38 Posted June 12, 2016 Author Share Posted June 12, 2016 Well it only took 40+ years ,but I got primer on the Boznetic Coupe'. Hope to have paint on in a mouth or so. Engine is done, need to finish the head.Cheers Link to comment Share on other sites More sharing options...
Dave 38 Posted June 13, 2016 Author Share Posted June 13, 2016 The engine. Just need the head to be finished. Link to comment Share on other sites More sharing options...
nearchoclatetown Posted June 13, 2016 Share Posted June 13, 2016 Dave, are you using one of those super secret heads? Do they make a six cylinder head? 1 Link to comment Share on other sites More sharing options...
keiser31 Posted June 13, 2016 Share Posted June 13, 2016 Nice oiling setup! 1 Link to comment Share on other sites More sharing options...
Dave 38 Posted June 13, 2016 Author Share Posted June 13, 2016 Only 4 heads made, I have no.3 Link to comment Share on other sites More sharing options...
Dave 38 Posted November 12, 2016 Author Share Posted November 12, 2016 Doing the final sheet metal fitting. It fits good! Get primed up and let it sit for a month or two. Need to finish up drive train. I think I have everything I need ,just some small parts to chase down. Cheers Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now