Guest ken2ya Posted February 5, 2010 Share Posted February 5, 2010 My Father is currently restoring a 1930 fordor and has run into a problem while trying to removethe front seat. It seems the 3 bolts on each end of the seat that secure it to the floor board are stripped out. The bolt heads turn but do not loosen. I inspected the underside of the floorbord but did not find any nuts or bolts. We are stumped as to how the seat is anchored to the floorboard and how it can be removed. Can anyone help us out here?Thanks.Ken Link to comment Share on other sites More sharing options...
A by the sea Posted February 6, 2010 Share Posted February 6, 2010 Never been into a 30 fordor so I can only give general advice.There is probably a captured nut set in a recess or a wood blind nut. For a real answer take the question to Fordbarn.com Model A forum as that is where the largest concentration of A guys can be found. Link to comment Share on other sites More sharing options...
JFranklin Posted February 6, 2010 Share Posted February 6, 2010 My fordor has machine screws down thru the wood bottom seat frame, mine is a Briggs body so don't know about what you are seeing. Post a couple of photos Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now