1925Stanley Posted December 9, 2008 Share Posted December 9, 2008 I’m looking for a large flare nut, similar to the smaller ones Art Hart has on his web site.This brass nut – see picture- has 18 TPI and measures .615” ID. Across the flats it measures .875” and is .750” tall. The male fitting threads are about .775” - .780” OD. My local hardware store (which is VERY GOOD!) does not have anything in this diameter or thread count at all.Any idea where these can be found?Thanks!Don Hoke Link to comment Share on other sites More sharing options...
Steamcar Posted December 18, 2008 Share Posted December 18, 2008 YOu might try a refrigeration supply house as the fittings are heavier. I was able to get the odd sized tubing and associated fittings for my 735B at one. I used a branch of Southern Refrigeration for what I needed.Jim Showers, Life Member1921 Stanley 735B1916 Crow-ElkhartSeveral Packards Link to comment Share on other sites More sharing options...
19114 Posted January 2, 2009 Share Posted January 2, 2009 I have one that I may be able to part with. It is as depicted, not like one you would find in refrigeration use. Actually it has been road tested on a Stanley. It isn't pretty but it is functional. Contact me and we can discuss terms of use.Lawrence Jones Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now