platt-deutsch Posted September 7, 2008 Share Posted September 7, 2008 How does the oil get back to the pan from the lifter area.. Is there a drain hole in there? I have been loosing oil from that area. Link to comment Share on other sites More sharing options...
Guest simplyconnected Posted September 7, 2008 Share Posted September 7, 2008 It usually gets pumped up to the rocker arms from there, and yes, there are holes in the block, where oil drips down to the oil pan. Check your gaskets. They should all stop oil from leaking out. Link to comment Share on other sites More sharing options...
dwollam Posted September 8, 2008 Share Posted September 8, 2008 Are we talking about a 25 DB 4 cyl. engine? If so, they are oiled by mist, later ones having hollow bolts or tubes so oil can be sucked up or splashed into the lifter area. Don't remember for sure if there are drain backs, but there are NO gaskets on the covers and yes they do leak a little (too much!). Also these are flatheads and do not have rocker arms. Nothing is actually "pumped" to the lifters on these. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now