just me Posted April 17, 2008 Share Posted April 17, 2008 Any ideas? There is a 17TAB and 16TC cast on two of the parts. ThanksCharley Link to comment Share on other sites More sharing options...
1937hd45 Posted April 17, 2008 Share Posted April 17, 2008 That is out of something good! Are the bolt heads square or hex head? If they are square it may be Rolls-Royce Link to comment Share on other sites More sharing options...
Layden B Posted April 17, 2008 Share Posted April 17, 2008 The wheel gear looks rather large, that would give a slow ratio for more leverage on a large vehicle with bigger tires to carry the load. I suggest this may be fire truck. Link to comment Share on other sites More sharing options...
just me Posted April 17, 2008 Author Share Posted April 17, 2008 the bolt heads are hex.Thanks for your replies.Charley Link to comment Share on other sites More sharing options...
jahorld Posted April 17, 2008 Share Posted April 17, 2008 <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Layden B</div><div class="ubbcode-body">The Wheel Bearinglooks rather large, that would give a slow ratio for more leverage on a large vehicle with bigger tires to carry the load. I suggest this may be fire truck.</div></div> I totally agree with him.__________________Autopartswarehouse Link to comment Share on other sites More sharing options...
Layden B Posted April 17, 2008 Share Posted April 17, 2008 Assuming the 3 bolt flange goes against the frame, the output shaft would be over the frame and the shaft up to the wheel is at a steep angle. Both hint at truck. Looks to be a Gemmer brand, they made lots of columns for cars and commercial vehicles. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now