George K. Posted October 20, 2007 Share Posted October 20, 2007 Hi - my name is George Kargov. I will be a new member of AACA in January 2008. I have been reading the forum topics and tremendously enjoying them. I have also been encouraged. 30 years ago, I purchased a 1930 Buick 46S. Back then, I started some restoration of the wood members. Due to my lack of knowledge, it was a slow process. I went to night school for woodworking classes and have learned enough to start restoring my car again. I will be taking the car out of storage early spring next year. Note - when I purchased the car, it was not in running condition and it did not have a rumble seat. The previous owner gave me a rumble lid and on it was written "Essex" in chalk. I wonder if this is the right lid for the Buick? I would be very interested in hearing from anyone who has done, or is doing, restoration on a similar model. georgekargov@sympatico.ca Link to comment Share on other sites More sharing options...
pwg Posted October 26, 2007 Share Posted October 26, 2007 George,I am restoring a 1930 Buick model 46s and I am currentlly making a new wood frame. I can provide photos and other information to help you with your project.Paul Gronhovdpgronhovd@undeerc.org Link to comment Share on other sites More sharing options...
Guest imported_Thriller Posted October 26, 2007 Share Posted October 26, 2007 Hi George,I just noticed the .ca address...whereabouts in the country are you located? I'm in the middle in Winnipeg. I have a '29 Model 51 that I plan to eventually restore.Good luck with your car. Link to comment Share on other sites More sharing options...
George K. Posted October 27, 2007 Author Share Posted October 27, 2007 Hi Paul,Thanks for your reply and offer. I'm looking forward to seeing your progress in restoring your car. I would also like to see how the wood frame looks - especially the rumble seat.Georgegeorgekargov@sympatico.ca Link to comment Share on other sites More sharing options...
George K. Posted October 27, 2007 Author Share Posted October 27, 2007 Hi Derek,I live in Toronto, Ontario. Good luck to you with your 1929 Buick. I will be joining the Buick club as well in Jan./08.Georgegeorgekargov@sympatico.ca Link to comment Share on other sites More sharing options...
Guest imported_Thriller Posted October 27, 2007 Share Posted October 27, 2007 As some things are similar to 1929, you may want to look up Bill McLaughlin (also in Toronto) - contact info is at http://www.29buick.ca/. Link to comment Share on other sites More sharing options...
George K. Posted October 28, 2007 Author Share Posted October 28, 2007 Thanks for the tip. Back in the 80s I used to be a member of the McLaughlin Buick Club of Canada. I had met with Bill and he was very helpful. I did see his 29 McLaughlin Convertible. At the time I checked the car and it was hard to see the wood construction. Link to comment Share on other sites More sharing options...
pwg Posted October 28, 2007 Share Posted October 28, 2007 George,I will attempt to attach a photo of the sill for a 46s.I have completed the notches for the door hinge pillars but not for the door latch pillars. Next step will be to install the hinge pillars and the cowl.If your car is missing a lot of the rumble seat parts it may have suffered a similar modification as my car. My car had the rumble seat parts removed and was most likely used as pickup to sell vegetables. I found vegetable sales signs in the back window pocket. Paul 1 Link to comment Share on other sites More sharing options...
George K. Posted October 28, 2007 Author Share Posted October 28, 2007 WOW! It looks great! Thank you Paul. What type of wood are you using? Thanks again! That picture will be so much help to me!George Link to comment Share on other sites More sharing options...
pwg Posted October 29, 2007 Share Posted October 29, 2007 The wood for the frame is 8/4 white ash from a mill in Minnesota. I really like working with it. It machines well and also is great for hand tools. I have been using the front holes that connect directly to the frame as my reference. You can see there is a channel on the underside of the sill that keeps it centered on the frame. The front holes are the only ones that are directly above the frame. The other holes are above brackets that sit on the outside of the frame.Paul Link to comment Share on other sites More sharing options...
pwg Posted November 2, 2007 Share Posted November 2, 2007 Here are the hinge pillars for the 46s. I had one good original to work from. It can become a puzzle to get every thing to fit together. You can see I had to make a length correction at the bottom. What is your opinion making corrections versus redoing the entire part?Paul Link to comment Share on other sites More sharing options...
George K. Posted November 3, 2007 Author Share Posted November 3, 2007 Thanks Paul - you do beautiful work! Regarding the hinge pillars, length correction - splicing of wood parts is mentioned in the Fisher Body service manual. What I would be concerned about is where the splicing is done. On the bottom of the hinge pillar where it meets with the seal, if it's strong enough to be able to support the door. Personally I would redo them so that I would not regret later on - when everything is screwed and glued together. That's my opinion. If anyone else has any other suggestions, please respond. George________________1930 46S Link to comment Share on other sites More sharing options...
Guest rlbleeker Posted November 5, 2007 Share Posted November 5, 2007 Personally, I have to do things over. Even if it would be completely hidden and only I would know. They don't look like there's a structural issue, just whether your happy with them. Link to comment Share on other sites More sharing options...
pwg Posted November 7, 2007 Share Posted November 7, 2007 I am attaching a photo to show how the pillars fit in the cowl. The strength to carry the heavy doors comes from the metal brackets and the cowl that is nailed to the pillars. There is also a crossbar that joins the pillars and is also nailed to the cowl. I want to maintain good quality and be accurate to the way it was built originally. On the other hand I am not building furniture. On the tear down I did find places where wood was added to fill voids. This was the case for the space behind the sheet metal trim below the doors attached to the edge of the sill. So for now I am happy with the results. Thanks for the feedback.Paul Link to comment Share on other sites More sharing options...
Guest rlbleeker Posted November 7, 2007 Share Posted November 7, 2007 Good point, I'm sure these things weren't perfect from the factory, probably more correct with a few adjustments. I've got a '30 Marquette model 36 (almost the same car) with questionable wood, so this thread is really interesting. I hope I can save it, this looks like a lot of work, and I'm not a woodworker. Link to comment Share on other sites More sharing options...
pwg Posted November 9, 2007 Share Posted November 9, 2007 The woodworking can be a challenge but rewarding when it goes good. I started out by making paper patterns based on the old wood frame. Some parts of the old frame are vague or nonexistent. I look for ways to cross reference those areas from books. Sometimes it just comes down to trial and error. The paper patterns for the sill would be available to loan out.Paul Link to comment Share on other sites More sharing options...
pwg Posted November 13, 2007 Share Posted November 13, 2007 Here is how the crossmember attaches to the hinge pillars.Paul Link to comment Share on other sites More sharing options...
George K. Posted November 17, 2007 Author Share Posted November 17, 2007 Looking great Paul. What steps are you taking first? Are you just dry-fitting everything outside of the frame, then re-assembling everything on the frame?Thanks,George______________1930 46S Link to comment Share on other sites More sharing options...
pwg Posted November 18, 2007 Share Posted November 18, 2007 The hinge pillars need to be plumb and the cowl needs to fit snug. So that has required a lot of dry-fitting and the cowl has been off many times. I also have the sill off because there are a few things to finish. Now that the sill fits well I can glue it together. Also I think it is important to seal the wood so that it will not absorb excess moisture. I think I will spray a coat of black epoxy on the wood for that purpose. Some people use spar varnish. What are you planning to do? Paul Link to comment Share on other sites More sharing options...
George K. Posted November 18, 2007 Author Share Posted November 18, 2007 At this point I haven't decided what coating I'll use because I haven't started restoring my car yet. I'm just reading the forums.George Link to comment Share on other sites More sharing options...
pwg Posted November 18, 2007 Share Posted November 18, 2007 When you start on the hinge pillars there are some key areas to look for. I am attaching a close up of where the cross member meets the hinge pillar. Note there is an angled rabbit groove that tilts the crossmember. The Buick technical advisor Beuford said that he used spar varnish to protect the wood frame on the cars he has restored. I decided to follow that advice and besides it is more fun that painting the wood black. It is important to have fun doing this restoration stuff.Paul Link to comment Share on other sites More sharing options...
Jim28-27 Posted November 20, 2007 Share Posted November 20, 2007 Paul,I really appreciate the pictures. I also need to replace the wood in my 1928-27 and I would like to see more pictures as you proceed. It will give me a better idea of what I will need to do. Jim Jbates2@yahoo.com Link to comment Share on other sites More sharing options...
Guest imported_Thriller Posted November 21, 2007 Share Posted November 21, 2007 Nice work Paul...looks like the car is making progress from the condition of the car in BCA PWD Member's Buicks - I got the '30-'36 photos up on Sunday...slowly making progress on the site. Link to comment Share on other sites More sharing options...
pwg Posted November 22, 2007 Share Posted November 22, 2007 The photo submitted to the BCA PWD was from the eBay auction 1-1/2 years ago. There was a previous attempt to redo some of the wood in the car. Fortunately enough of the original wood was saved to determine how the frame was designed to fit together. My goal is to finish in 3 years. So far so good.Paul Link to comment Share on other sites More sharing options...
pwg Posted March 29, 2008 Share Posted March 29, 2008 I had a situation with the cowl and door pillars that took some time to resolve. Turns out the front angle brackets were pulling on the cowl in an uneven fashion. The 3 cover plates on the door pillars were what provided the information needed to correct the problem. When the nail holes of the cover plates were lined up with the cowl it could be determined that the cowl needed to be raised on one side. The covers also position the hinges and the top bracket. This allows the correct height of the door pillar. Now that the moldings on the body parts are lining up I can continue the frame by building around the door. So the door pillar covers were a big help in getting the layout correct. I have included photos that illustrate this.Paul Link to comment Share on other sites More sharing options...
pwg Posted March 29, 2008 Share Posted March 29, 2008 Here is another attempt to attach some photos.Paul Link to comment Share on other sites More sharing options...
George K. Posted April 1, 2008 Author Share Posted April 1, 2008 Thanks Paul for the information. This will be a lot of help to me. The photos look great. Will you be using nails or screws to attach the cover plates to the door pillar?George Link to comment Share on other sites More sharing options...
George K. Posted April 1, 2008 Author Share Posted April 1, 2008 Thanks Paul for the information. This will be a lot of help to me. The photos look great. Will you be using nails or screws to attach the cover plates to the door pillar?George Link to comment Share on other sites More sharing options...
pwg Posted April 1, 2008 Share Posted April 1, 2008 Hello George,I am using ring nails with flat heads that I bought from Bob's Automobilia. They are made to stay put so I wait until everything is lining up before nailing. I am even holding off on nailing the top of the cowl until I check on the clearance of the doors once the body is attached to the frame.Paul Link to comment Share on other sites More sharing options...
pwg Posted April 1, 2008 Share Posted April 1, 2008 Hello George,I am using ring nails with flat heads that I bought from Bob's Automobilia. They are made to stay put so I wait until everything is lining up before nailing. I am even holding off on nailing the top of the cowl until I check on the clearance of the doors once the body is attached to the frame.Paul Link to comment Share on other sites More sharing options...
HarryJ Posted April 7, 2008 Share Posted April 7, 2008 Paul.....I envy your woodworking ability! IBy the way I also used spar varnish to protect the wood in my car. Link to comment Share on other sites More sharing options...
kevinc Posted April 29, 2008 Share Posted April 29, 2008 Hello, I have joined this group because my father has terminal lung cancer and is unable to join. He has a 1930 Buick 46S also and has been looking for others that have one also. He was trying to restore his but was unsure how. Any and all information on how to do this would be greatly appreciated. The car was actually running about 20 years ago but has a cracked block now. Any suggestions as to what to do with the car? Thanks, Link to comment Share on other sites More sharing options...
pwg Posted May 3, 2008 Share Posted May 3, 2008 Hello Kevin,Sorry to hear your father is ill. I worked with my dad on a couple of these old vehicle restorations and it is a good way to spend some time together.There are people who specialize in welding cast iron. That may be a good option for you. I could post a name if you want. I also have a parts car block that I may sell. It has frozen pistons and it would be costly to ship. The 46s has the standard size motor so any 40 series Buick motor should work. Paul Link to comment Share on other sites More sharing options...
42crazy Posted May 3, 2008 Share Posted May 3, 2008 Kevin, I also have a 30-46 parts car, it has the motor and trans., where are you located ? You may be close enough to pick it up, thanks, Paul Link to comment Share on other sites More sharing options...
Erndog Posted February 22, 2022 Share Posted February 22, 2022 (edited) PWG, that is beautiful work! I am going back through forum entries for reference and "re-found" this gem. I have been restoring a completely rotted 30-61 for more years than I care to admit. Sometimes I go years without doing a thing, others I go like crazy. I have yet to finish with remaking ALL of the wood (from ash). However, I am 95% done. I have recently been trying to finish up the front hinge pillars and crossbar. The hinge pillars were extremely rotted, but I believe I made fairly faithful reproductions. I do need to make some adjustments to the curve on the crossbar, though. This is a second go-round. I made all three pieces years ago, quite nicely. However, I noticed last year some major flaws in each and had to start over. I have a question for you that is really perplexing me. How did you remount the cowl section to the car?? I assume the best method is to attach the cowl assembly to the main sill assembly and then the whole shibang to the frame. I understand that I can probably finagle the cowl past the pillars without too much damage (?) while "creating" the cowl assembly. But then, how do you get all this onto the frame without removing the steering column? Or can you? Does the steering wheel need to be removed if you can? And to remove the steering column, it looks like the engine must be removed first. Ugh! Advice?? I welcome input from anyone else on this, too! Edited February 22, 2022 by Erndog (see edit history) Link to comment Share on other sites More sharing options...
Hubert_25-25 Posted February 26, 2022 Share Posted February 26, 2022 (edited) Ernie, Correct on the best method is to attach the cowl assembly to the main wood sill assembly, then all this onto the chassis. The steering column will come out without removal of the engine. Remove the linkages at the base of the steering column and the horn wire. Remove the pitman arm from the steering column. You likely will also want to remove the steering wheel just to have it out of the way. The steering column will slide out without removal of the engine. You may be able to set the body on the frame with the steering column in place, but that requires the 6 to 8 people lifting the body, and they will have to lift the body over the column. As you can see, I installed my steering column after the body was installed. It meant that placing the body became a much simpler task. Hugh Edited February 26, 2022 by Hubert_25-25 (see edit history) 3 Link to comment Share on other sites More sharing options...
Erndog Posted February 26, 2022 Share Posted February 26, 2022 Thanks for the info! Great photos. Your car is quite a bit earlier than mine, but I will assume the steering situation should be similar. Link to comment Share on other sites More sharing options...
Erndog Posted March 2, 2022 Share Posted March 2, 2022 So. looking at things again, if I remove the steering column I am still either going to need to remove the gear shift and emergency brake, or lift it over all that anyway. Link to comment Share on other sites More sharing options...
Hubert_25-25 Posted March 3, 2022 Share Posted March 3, 2022 It is easiest to remove the aproximately 4 bolts that hold the top cover to the transmission. That will remove the gear shift lever. Make a cardboard cover for the top of the transmission to keep any dirt out. The brake lever is held to the side of the transmission with a cotter pin. Then nothing is in your way. 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now