1967 firebird for sale

This is an awesome pro street car but the interior and body have been restored to look very factory. The interior is stock appearing except fot the cage shifter and tach. It has all new chrome and emblems, new paint, new weather stripping and Glass! the drivetrain is completely new and has only about 10 miles on the whole car.

Have PHS packet on this car, was originally 326/auto factory A/C, Verado green with Black deluxe interior

Motor is a Pontiac 400 +.060 (412 cid)

2 Holley 600's on Offy Intake

Racer Brown .510 cam

mildly ported heads

Forged pistons 9.7 to 1 compression

Doug thorley headers

petronix ignition

RobB MC fuel system (pump and filter)

16 Gal cell with sender in trunk

-10 fuel line

all AN style line and fittings from fuel cell to carbs

Aluminum Radiator

Trans 2004R built by Vince Janis 3000 stall w/lock-up

B&M Pro Stick shifter

Deralle deep pan with cooling tubes

TCI trans cooler

new driveshaft and u-joints

Rear Ford 9"rear end with strange center and spool 4.86 gear

35 spline moser axles

4 link w/coilover shocks

aluminum pinion support

SSBC rear disc brake kit

Front suspension Heidts tubular control arms with 2 in. dropped spindles

69 firebird style disc brakes

Chrome steering gear (center link,tie rods, idler arm,steering arms,brake dust shields)

Fast ratio power steering box

Line lock

adjustable proportioning valve

mopar style aluminum master cylinder

Dot 5 Fluid

33x22.5 Hoosiers on weld pro stars

25x4.5 hoosier front runners

body all steel w/400 hood and all 400 trim

base/clear paint ('07 Subaru Chrystal Grey Metalic)

rear wheel wells streatched 3"

smooth firewall

all glass new except the door glass

all new weatherstripping

new interior, 69 firebird buckets with 67 uppholstry,new headliner,carpet, everything replaced except door pannels,and dash pad!

Painless wiring /whole car

wiring in engine compartment all hidden

autoguage 5"monster tach with shift light and recall

No radio,not needed! Has radio delete plate!

Much more just ask, could easily be raced if you wanted to. It has all heavy duty parts and would need very little to be raced.

I have a complete photo documentation of the build which took me about 1 year to complete (about a hundred photos) I also have most of the receipts fror everything done to the car. This car is brand new from front to back!!

I just bought a set of Kauffman D port aluminum heads that are being ported and will soon be installed as well as a set of 1.65 roller rockers!!!!

asking $30,500

Chris 440-636-5509

216-854-0359 Cell