Guest RAFA Posted April 1, 2007 Share Posted April 1, 2007 Hi gents and ladys, I need your help finding trim moulding clips for my 1936 chrysler airstream c-8thank you Rafa. Link to comment Share on other sites More sharing options...
Guest RAFA Posted April 3, 2007 Share Posted April 3, 2007 Any leads anybody ??RAFA. Link to comment Share on other sites More sharing options...
35cz8 Posted April 9, 2007 Share Posted April 9, 2007 I have seen them on E-Bay before, but they go high on price. I have used small, flathead machine bolts and ground down the edge of the heads to fit the slots in the mouldings. By doing this, you can slide them to where you need them and then put a flat washer, lock washer and nut on from the inside. Not original, but it will sure hold the mouldings on. Good luck. Bob Link to comment Share on other sites More sharing options...
mopar380 Posted April 9, 2007 Share Posted April 9, 2007 You might want to try the Clip House, http://www.thecliphouse.com/Good luck, Ian Link to comment Share on other sites More sharing options...
Guest RAFA Posted April 10, 2007 Share Posted April 10, 2007 <div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">I have seen them on E-Bay before, but they go high on price. I have used small, flathead machine bolts and ground down the edge of the heads to fit the slots in the mouldings. By doing this, you can slide them to where you need them and then put a flat washer, lock washer and nut on from the inside. Not original, but it will sure hold the mouldings on. Good luck. Bob </div></div>Thank's Bob I might to do that if I can't find them...lolRAFA. Link to comment Share on other sites More sharing options...
Guest RAFA Posted April 10, 2007 Share Posted April 10, 2007 Thank's Ian, I will give them a call tomorrow.RAFA. Link to comment Share on other sites More sharing options...
williegeno Posted January 18, 2014 Share Posted January 18, 2014 Still looking? I have some. $20 and you pay the shipping.Williegeno@aol.com Link to comment Share on other sites More sharing options...
StillOutThere Posted January 23, 2014 Share Posted January 23, 2014 http://www.rjlautofasteners.com/ Have you tried RJ&L ? Awesome source of if you have excellent samples, they will make hundreds for all of us. Link to comment Share on other sites More sharing options...
countrytravler Posted February 8, 2014 Share Posted February 8, 2014 Good info. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now