Jump to content

49 windsor rear drum removal


grog

Recommended Posts

Has anyone removed their rear drums, I removed the kotter pin and nut and made a 6"x1/2 thick rd plate to bolt to the front of the drum via the lugs and loosed the rear adj bolts for the brake shoes the drum spins free soaked it with penetrating oil but for the life of I cannot get the drum to pop off I'm using a 3 jaw puller. This drum has never been off and thinking it has rusted to the shaft, should I put a torch on it and heat it up and have a go at it. I have to replace the brake piston. Any suggestion, advice, tips would be great. Mark

Link to comment
Share on other sites

Guest imported_BaronvonR

Well the rear drums are always a bugger to get off and if they have not been off in a long time they do tend to stick. You do need the drum puller and making sure it is properly centered you need a 5# hammer and hit the tightening screw REALLY hard...a few times...it will come off with a "Bang". Some have used heat, but I for one have not...just brute strength.....

BvR

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...