1948 Chrysler Windsor parts

I am in the process of cataloging some old Mopars that have been sitting in an old junk yard for 30-40 years. There are Plymouths, Dodges, Kaisers, Packards, Chryslers and more. The first car I am working on is a 48 Chrysler Windsor. The front grille is complete with all three bumper guards present, as is the front grille. The rear bumper is all there as is all the rear lights and bezels and emblems. The interior is shot, but all the hardware is there (radio, dual heater, gauges, knobs, escutchons, handles, steering wheel w/ center piece and horn ring, cranks, engine, tranny, glass, outside trim and original mopar yellow fog lights. If anyone is interested in these parts please email me. I am trying to see if it is worth my time to strip the cars and sell the parts. These parts are not NOS and have some pitting and need some work. If no one is interested.....it will end up in the scrap yard <img src="http://forums.aaca.org/images/graemlins/confused.gif" alt="" /> <img src="http://forums.aaca.org/images/graemlins/confused.gif" alt="" /> <img src="http://forums.aaca.org/images/graemlins/confused.gif" alt="" />

Do you have any 1949 Windsor parts?

At this time I'm really not sure whats out there. Now that you mentioned it, I really have to make sure the Chrysler is a 48. A lot of stuff is still interchangeable. I hate to see it waste away or be crushed.

Here is a list of 1949 Chrysler Windsor parts if you have them.... driver side window glass (4door), bumper guards, rear chrome,hubcaps,bullet head lights, fog lights (working), fan, generator (GDZ4801), fire wall tag, if your have any of these items let me know and asking prices..thanks Mark

Mark, I will check on these items this weekend and get back to you with pics. I know there is an original set of mopar fog lights in the trunk with the brackets. They would need to be rechromed.

Glenn

i have a 1950 chrysler club coupe i want a radio for it i wonder if the 48 is the same radio,and maybe take the fog lights let me know how much thanks

I have a 1948 windsor and I need a radiator front dust shield, the cowl moldings and clips, floor screws, the fender screws that mount to body and screws that mount to the inside fenders,both rear door windows, and starter.Thanks scot! scotfree63@cox.net <img src="http://forums.aaca.org/images/graemlins/cool.gif" alt="" /> <img src="http://forums.aaca.org/images/graemlins/cool.gif" alt="" />

I just bought a 48 chrysler, not sure of what parts are missing, however I do know it needs some of the outside trim, front fender chrome trim looks like grille extensions that are missing. I will get the car sometime between this weekend and the 12th of May so will know then and will list all parts I am interested in and you can contact me to let me know if you have any. Thanks

Hi there - sounds like you will be doing a real public service in saving some useful parts from the crusher. I live in Britain and finding parts for my 51 Windsor can be pretty difficult but now thanks to the internet not impossible.

I need window glass for passenger front window and rear passenger door vent but not sure if this is the same as 48 model. Also need various bits of chrome trim as mine is all pitted.

Good luck with your enterprise - remember on-line auctions are a lifeline to some of us!

Need oil filter for 48 Windsor

Need oil filter complete for 48 Windsor

Need working temp gauge

I HAVE 49 WINDSOR PARTS,WHAT WERE YOU LOOKING FOR?

Any 52 Windsor stuff----good Chrome trim??

I have spome 52 stuff-what did you need?

I have a 2dr Windsor---could use any good exterior chrome trim pieces--headlight and tail light bezels-fender spears----any good pieces that aren`t full of pits---good sterring wheel?? Chrome does not need to be show quality---need it for a nice driver--stuff that would not need chroming----I could use the drivers side front headlight bezel for sure as long as it`s not cracked or broken---let me know what you have---------Thanks!!

wanted 48 chrysler royal upper and lower hood latches, also, instrument panel glass

bill 208-582-2699 Idaho

'46 -'48 along with the early '49 were largely interchangeable but not necessarily between different models (Plymouth to Chrysler for instance). I am interested in either 1)a '46-'48 Chrysler cowl mount side mirror (I believe they were options) for both sides or 2) the cowl trim and clips for the same car. I believe these were interchangeable between Chrysler/ Dodge/ DeSoto only. Do not scrap, please. Offer it on craig's list for scap value first. mrushdoony@att.net

i'm in need of the chrome around left front turn singal

zack, i need a trunk light socket for my 54 windsor. the one that turns the bulb on/off with the movement of the trunk lid. the 52 might be the same. the 53 is.    capt den

Zack last posted in 2006

you should send him a message

On 4/29/2021 at 7:36 AM, Chry54 said:

zack, i need a trunk light socket for my 54 windsor. the one that turns the bulb on/off with the movement of the trunk lid. the 52 might be the same. the 53 is.    capt den

You need to run the MoPar # online/ ebay, AMS, Roberts, Len Dawson ...on and on....every week and join the National Chrysler club.

Then contact all owners of the same car...then you will have a chance of finding the mercury trunk lite.

I probably have one but am not going to spend hours digging parts...sorry.

c49, thanks for the tips. did not know there is a national chrysler club. i would look for the socket for you. my email is captdennis29@gmail .com just in case you run across it while looking in your stash for something else.    capt den

I made a mistake not the chrysler club....the WPC Club..

Maybe you know of that.

Any parts for Chrysler 1948 in 2023 ?

I am parting one, but its getting pretty well picked.

Could you post some pics of what you have?  The links above go nowhere.