Mitch Posted September 18, 2004 Share Posted September 18, 2004 My dad and I are working on a Dodge Luxury Liner with a fluid drive. The car runs great but the fluid drive was leaking. Dad removed the unit from the car,we removed the clutch driving plate nut,clutch driving plate and the snap ring. We made a spanner wrench on the milling machine to remove the bellows seal. It will not move, I made a adapter to use a 1/2" impact wrench on it,still it will not move!!!!!!!!!!! Is this thing left hand threads? Do you have to heat this bellows nut to get them off? The old mechanics in this area that knew the answers to my questions have gone on to heaven. We have set this fluid drive aside until we hopefully hear from one of you that can help us. Thank you Mitch Link to comment Share on other sites More sharing options...
32tatra Posted September 26, 2004 Share Posted September 26, 2004 I also own a 41 Dodge. I did Not have the problem you have. Mine came apart with no problem. The reason yours won't come loose is that I think some body had it apart year ago and and when they put it back together, they made it too tight. I would say you should try heating it.michael Link to comment Share on other sites More sharing options...
Mitch Posted September 30, 2004 Author Share Posted September 30, 2004 Michael I heateted the nut and let it cool, and it came out real easy. Thank you Mitch Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now