johnarthur Posted April 27, 2003 Share Posted April 27, 2003 To all enthusiasts of the Airflow.I am currently restoring a C9 Coupe and have discovered that the crankshafts that I have are embossed with the numbers 618624 and these numbers don't match up with the numbers listed in the master parts list for Chrysler passenger cars from 1936 to 1942 issued in July 1947. This book quotes the number for the crank as 618623.I believe that the crank that I have was out of my fathers CV Coupe but am not sure. I also believe that it is the long stroke item at 4.875 inches.I also have a crank which is embossed with the numbers 618620 and I believe that it is the shorter stroke version at 4.50 inches from a CU. Further to this I am chasing the rear main oil seal for the crank on the C9 and my books tell me that it is part number 304744. It also lists the rear main seal complete with the seal retainer as part number 308354. A complete kit comes up with part number 891456. Does anyone know where I can purchase the seals as well as the information on the origin of the cranks that I have as well as confirmation on what should be in the Coupe. Regards to all Link to comment Share on other sites More sharing options...
Donald_G Posted April 4, 2009 Share Posted April 4, 2009 FEL-PRO BS 6300 replaces no. 891456 and is readily avaliable Link to comment Share on other sites More sharing options...
Guest JohnArthurSpinks Posted April 5, 2009 Share Posted April 5, 2009 Donald G,Thank you for the update on a question that I posted way back in 2004.I live in Australia and your information is very helpful.Where did you get this information from?CheersJohn Spinks Link to comment Share on other sites More sharing options...
dep5 Posted April 8, 2009 Share Posted April 8, 2009 <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: johnarthur</div><div class="ubbcode-body">To all enthusiasts of the Airflow.I am currently restoring a C9 Coupe and have discovered that the crankshafts that I have are embossed with the numbers 618624 and these numbers don't match up with the numbers listed in the master parts list for Chrysler passenger cars from 1936 to 1942 issued in July 1947. This book quotes the number for the crank as 618623. . . . . . . . . . </div></div>It is not at all unusual to find forging and castings with numbers that differ from the parts list. These parts may be manufactured with one identification number for routing and when final operations are performed then a new number is issued. I have seen aluminum diecast parts manufactured with both rough casting and finished part numbers. When the part is machined, only the finish numbers remain. Keep in mind the 1947 parts list will no doubt contain superceeded numbers. Do you have the C9 parts lists? The 1929-39 Chrysler parts list?If a crank is ground to different sizes then the parts list would have different numbers.I will try to research specific information for your application. Link to comment Share on other sites More sharing options...
Donald_G Posted April 9, 2009 Share Posted April 9, 2009 This information came from the <span style="font-weight: bold">FEL-PRO BS 6300</span> packaging.I purchased this within the past week cost is less than $30.00 and is avaliable from any parts supplier selling FEL-PRO gaskets. Link to comment Share on other sites More sharing options...
Guest JohnArthurSpinks Posted April 10, 2009 Share Posted April 10, 2009 Donald G,Thank you for your efforts but unfortunately the seal that you mentioned is only suitable for the 6 cylinder flat head Mopar.The 8 cylinder version has a larger diameter crank which means that i must keep looking.Thank anyway.CheersJohn SpinksAussie C9 Chrysler Airflow 8 Link to comment Share on other sites More sharing options...
Guest JohnArthurSpinks Posted April 10, 2009 Share Posted April 10, 2009 Dep5,No, I do not have a C9 parts List which is a bit of a pain.CheersJohn Spinks Link to comment Share on other sites More sharing options...
Donald_G Posted April 11, 2009 Share Posted April 11, 2009 John,This is the replacement for part number 891456 as shown on the box.Are you sure of the part number you are looking for?What is the diameter of the crank where the seal is?Donald Link to comment Share on other sites More sharing options...
Guest JohnArthurSpinks Posted April 11, 2009 Share Posted April 11, 2009 Donald,I have a parts list that covers '36 to '42 Chrysler and it states that the rear main rope seal is part number 304744 and the seal package is part number 891456.When reading the Felpro package that you have posted it says that 891456 fits 218, 228, 230 241, 251 & 265 engines.all of these I think are 6 cylinder engines.My engine in the C9 is an 8 cylinder 323 Cube engine and the crank is obviously bigger not only in length but journal diameter as well.The rear main oil seal surface diameter on my crank is 2.875".The 8 cylinder engines in the Airflows were 323 cube with the exception of the '34 CU which was 298 cube.I seem to think that either Felpro or the parts list have screwed up on the numbers.I am sure that the 6 cylinder crank rear main oil seal surface daimeter is considerably smaller. I hope that this clears this issue up.I am however trying to determine if the oil seal surface diameter on a say '38 '39 etc Chrysler 8 engine is the same.I have one half of a rubber rear main oil seal here with me at the moment and it has the following on it - Flaseal A1007 695786 and checking my parts listing the part # 695786 apparently fits a '39 C23 & C24, also a '40 model C26 & C27 etc etc.Running a rough check across it with a vernier it appears as though it will fit a 2.875" crank seal surface.Maybe this is what I need to chase?CheersJohn Spinks Link to comment Share on other sites More sharing options...
Donald_G Posted April 12, 2009 Share Posted April 12, 2009 John,Yes this seal looks to be 2.625 the part numbers have probably been messed up over the years, I have seen this before.Sorry for the false hope good luck with your search.Donald Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now