1939 Dodge 4 door parts needed!!

Need the two chrome strips for the hood on my 39 Dodge d-11 4 door. Please contact me at gis1@nelson-tel.net if you can help.

Thanks!!

Mike

Mike,

I had a similar problem with missing trim between the hood & door, I was also missing the compound curved trim strip below the right rear window, ( I have a 39 D-11 Coupe). My solution was to use the trim strip from the running board to fabricate the missing trim strips. I will find something close for the running boards. The compound strip was very carfully heated, curved & polished. The ends were cut oversize so that they could be cut & folded, then silver soldered, shaped & polished, it's hard to see the blended seams. The short strips were much easier. Your strips are straight and should be easy to make if you care to sacrifice the running board trim. Good luck

Hey, I'm looking for running board trim for my 4d sedan.. !!!

Don't sacrifice those PLEASE! <img src="http://www.aaca.org/ubbthreads/images/graemlins/grin.gif" alt="" />

I might have some hood chrome strips I'm not quite sure yet. I will let you know as soon as possible.

here's a parts car <img src="http://www.aaca.org/ubbthreads/images/graemlins/grin.gif" alt="" />

http://www.aaca.org/ubbthreads/showflat....amp;amp;fpart=1

bgalla and mike,

I have a 1939 4 door dodge sedan that I am trying to find the running board rubber, any help on whether these are being remade anywhere or do I need to improvise.

Narmer2000,

I am looking for replacement rubber for my 1939 dodge running boards - any suggestions?

Thanks, Boiserob

Here's a place that will recover yours.

http://www.runningboardmats.com/pics1.html

Boiserob, if you got yours made in Precison Rubber.. Let me know!!

You can email me (in any case) at mikajaakkola1979 at yahoo.com.

I really would like to meet more '39 Dodge owners.

Thanks!