poncho Posted January 15, 2003 Share Posted January 15, 2003 I plan to use the headlight repair guide on reatta.net, however, I'm curious to know why the headlight motor operates so much more consistently in the cold, and why when it's warm, it's rare if the damn thing EVER pops up! <img src="http://www.aaca.org/ubbthreads/images/graemlins/confused.gif" alt="" /> Link to comment Share on other sites More sharing options...
Barney Eaton Posted January 16, 2003 Share Posted January 16, 2003 Good question as I have the same problem (not with my Reatta) if you discover the answer, it will make me very happy.When you say cold, do you mean like below freezing? Could be the plastic turned to powder, has enough moisture to make it more solid and allow the gear to drive the shaft. I rebuilt a headlight motor last week that the rollers were ground to a fine powder consistancy. Link to comment Share on other sites More sharing options...
Guest Posted January 17, 2003 Share Posted January 17, 2003 Mine used to slip on the shaft that raises the light assembly. I kept tightening the locking screw to keep them working. Then I hit a deer and the insurance company replaced the whole front end. The new ones work great in any weather. It's 6 degrees above zero here tonight. Link to comment Share on other sites More sharing options...
Guest EDBSO Posted January 20, 2003 Share Posted January 20, 2003 As the bellcrank gets cold it shrinks and holds onto the shaft with increased grip.The repairs are easy and long lasting if you file the washer so that it is a press fit. Link to comment Share on other sites More sharing options...
Guest Orono Posted January 21, 2003 Share Posted January 21, 2003 My 88 does the same thing. When temps are in the 40's they work great. Above that, I have to raise them manually, (They always go down). Sometimes the heat from the engine comparment will be enough to cross the temp. thesh-hold. If I stop at a store I will hit the headlights up button to keep them open. This usally works, however, occasionally the lights will be down when I come back out and I will have to raise them manually. I am assuming there is a poor contact in the headlight module. Are the module's repairable? I recall seeing "replace only" or "do not repair" stamped on the it. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now