Guest Posted December 30, 2002 Share Posted December 30, 2002 I need to know what year spindles interchange with '39 spindles and are '40 and '41 spindles the same?Also, who sells a quality kingpin rebuild kit? I'll need new bushings and bearings, but the kingpins look salvagable. Link to comment Share on other sites More sharing options...
Guest Posted December 30, 2002 Share Posted December 30, 2002 Hi Roman, really need to check a LZ parts catalog for sure, but I am relatively positive that '39-'41 spindles are exactly the same, quite possibly right on through to '48, but I am not certain of that. If the Kingpin sets are still "in print" they will have all the bearings, bushings etc with the kit, I would recommend ordering them from a large truck supply parts-house, they would be more likely to know of a supplier than your local NAPA outlet, would be good to replace the pins too, they don't wear much, but that is a critical area. If worse comes to worse, check Hemmings magazine, seem to remember extensive sources for that sort of stuff there, good luck, OC Link to comment Share on other sites More sharing options...
willie Posted December 31, 2002 Share Posted December 31, 2002 Looking in the "Lincoln Classis Parts Catalogue" The 39 & 40 Spindle with P/N 96H 3105 are the same. The 41 P/N is 16H 3105, the 42 to 48 with P/N 26H 3105 are the same. I have the part numbers from the book, I don't know if they are all the same. I hope this will help. Link to comment Share on other sites More sharing options...
Guest Posted December 31, 2002 Share Posted December 31, 2002 Thanks Willie, really have to get one of those books, they are sure handy. Usually when there is a number change like that, there is a difference, but as you say it can be a big change, or a very minor difference that wouldn't affect interchangabilty, almost have to look at them side by side to tell, OC Link to comment Share on other sites More sharing options...
DSpringer Posted January 4, 2003 Share Posted January 4, 2003 Willie,Where did you get your parts catalog? Are they readily available?Dave Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now