rwoods

Members
  • Content Count

    83
  • Joined

  • Last visited

Everything posted by rwoods

  1. the two ten convertible plate shows its either 53 or 54 as that's the only years they were made.
  2. rwoods

    49 Plymouth 6volt to 12volt conversion questions

    Why not use a 6 volt alternator ? The model A ford guys use them a lot.
  3. rwoods

    Model A Truck Chrome radiator shell

    no 28 29 radiator shells were stainless steel,they were painted black or nickel plated very late 29s may have been chrome.
  4. rwoods

    Bumper Jack

    you will not pick up your 63 impala with any bumper jack as the hook has to fit the bottom of the bumper.jack the jack on ebay
  5. rwoods

    For Sale: 1951 Chevrolet Styleline Deluxe Coupe

    where are the stainless stone guards for the rear quarters?
  6. rwoods

    FOR SALE: 1957 Chevrolet Bel Air hardtop

    1957 265 cu engines came from the factory painted yellow.they were not very common.
  7. rwoods

    20 or 30 year old can of motor oil

    check the price per quart at snyders model a parts, you have a mint.
  8. rwoods

    1918 Rauch & Lang electric

    That 1930 ford in the background looks like it has Pa antique plates.
  9. The number for rustoleum satin black is 7777
  10. rwoods

    Ford tire inflator

    This was used on ford tractors around the 1940s to 1950s, give or take a few years F
  11. rwoods

    cuba 2 out of 3

    1951 or 1952
  12. the cap is 29-29 ford, the bird is not ford.
  13. rwoods

    License Plate Frame ID Needed

    the full frame is 1957 Chevrolet they were gold for belair and silver for the two ten and one fifty
  14. rwoods

    Need to ID a GM 61-63 Trumpet horn Please.

    try 1965 impala as they had trumpet third horn,mounted on top of inner fender
  15. rwoods

    55 56 57 Chevy Conti kit

    YES I WAS WORKING AT A CHEVROLET STORE IN 1956 AND I PUT ON MY NEW 1956 CHEVY. IT USED A SPECIAL CENTER SECTION TO HOLD THE WHEEL.THEY HAD A CHEVROLET PART NUMBER AND EVERY DEALER HAD TO TAKE ONE,THATS HOW I GOT MINE THEY GAVE IT TO ME TO GET RID OF IT.
  16. rwoods

    Potter trunk

    1932 chevrolets also used Potter trunks straight back would be for a coupe or roadster.
  17. rwoods

    1958 Chevy DelRay Engine Swap

    automatic trans cranks were not drilled for standard trannys.the crank hole is not deep enough,stick a screwdriver in the hole and compare with your tranny.once in a while thay will fit,i have had some that were deep enough but the pilot bushing would fall out.seems that auto cranks were standard shift rejects
  18. I have a 65 Monza coupe dark blue -white interior 110 with pg ,fun car to drive. had a 63 sedan in the late 60s the kids called it stinky,The defrosters kept the windshield well oiled,that was the only part that didnt rust.
  19. That big light is called a passing light,that was a GM accessory fron 1939 to 1941 I would bet that amp meter really bends with all those lights on.Its a suprise to see the interior,but I like it.
  20. If you look at the front of this car all those lights and bumper guards are all factory accesories for 1939.Anyone know what they called that big light on the drivers side? That car is a lowrider,more than likely from California.It is a very nice car.
  21. rwoods

    Need source for 6 volt battery cable

    try a welders supply company,most of them carry 00 cable by the foot and can put the starter end on.its the same as on welding cable.
  22. rwoods

    Name that Chevy...

    there is too much side trim for a delray looks like a belair,not in that bad shape for a 58 shame it could not be restored.belair two doors are in big demand.
  23. rwoods

    TAIL LIGHTS

    i see a lot of talk about painting the inside of tailights for more light,silver or white were mentioned,is one brighter than the other?
  24. rwoods

    What type of shock oil?

    motorcycle fork oil is also very good and comes in different weights such as 10 weight up to about 50 weight.
  25. rwoods

    Modern Finishes?

    the tank was not full of paint.it was full of water with a layer paint on top,the parts were suspended overhead on a moving cable that diped the part down through the paint and into the water and while it was moving came back up through the paint and went into a oven to dry. i have seen new model a ford fenders and the finish was perfect. dupont centari that has been buffed is about as close to the dipped fenders as you can get.