Binkss

I made the distinction plain and clearly so as not to lead to an assumption at to the side I required the exhaust outlet to be. Clarity in information elevates leading to "Assuming" what one wants. To ASSUME can lead to the saying we have in the UK Making An "Ass out of You and Me ". especially if there is miss interpretation of the requirement. I prefer to ensure the other person knows full well what I require. But Thanks for pointing these concerns out to me.

Yep, I'll go with that. Port side is a good term for those that know Port from Stb'd . However not all do, so simple clarity is I find the best way to go. Especially as the US drives on the Wrong Side of the Road :-)) If you have any leads please do share. Location should not be a problem, US, Canada, South America, Aus, NZ of where ever. Thanks Peter.

Hi Looking for either of the following. T Head Engine for a 1914 Halley Truck ( UK Truck) approx 35 to 40 hp If we cannot find an original Halley engine, then a T head from the Era would be better then nothing. No Gear box required as the Halley is Chain drive. The correct Gear Box Has be found and is sitting in the Chassis. One important Factor the Exhaust pipes need to exit on the Left of the engine (When Facing from the rear to the front. ) if possible . Most of the bits for this truck have been found or made, just an engine to find now. Any help or leads would be good,please, or any other news of other existing Halley trucks. Thanks Peter

1929 Studebaker Commander 8 FDT Looking for pair of Delco Remy Lovejoy front Shock Absorbers, Strap Type. Also Wire wheel tyre locking ring for the same vehicle Any help or leads or contact info as to where I may try, would would be most welcomed. Many thanks Peter

Never sure where to post questions in these forums, so sorry if in the wrong section. Can anyone advise it there is a shopping - buying service for the Hershey Meet by any one. Looking for Items for the 29 Studebaker Commander 8 FDT, but unable to get to the meet from the UK. If any one is interested in helping, quite happy to pay a commission on the conclusion of a successful purchase. Thanks

Hi Maybe you have sorted your problem, however, if not try kevin@windshieldframes.com company is NC industries Antique auto parts Sayre, PA 18840 Call 5708881821. They have patterns for many cars and are making me a complete new sceen, using original type frame pressings . Not cheap but I hope worth it.

Can any one please help with a source for the following items for a 1929 Commander 8 FDT 1).Half round chrome trim, fitted up the sides and over the top of the 1929 era Studebaker Commander and President Cars. We have a 1929 Commander 8 FDT , been stored in a barn for some 15 to 20 years. The chrome trim has rusted quite badly, the rust is too deep to polish out. Is any one still making it. 2). Delco Remy Lovejoy shock absorbers for the front :- Looking for either two front shocks or can some one please advise the Delco Remy part numbers. Originals were replace with Armstrongs. 3). Windscreen frame:-