30dodgedd6

Ok yes its a 37 then! Big difference from the 36 to 37 they really dropped some class and made it more for work I guess.

Hello All, I found a complete 36 terraplane pickup. Its been sitting for years outside. Looks solid not a spec of paint left on it. Glass is bad but there. It has the standard doors non suicide. Are these valuable? I am trying to get them to sell it to me but not sure what it would be worth now and after restoration. Any ideas? I seen one in somewhat of a primer state was form ore than 10K. Got any pics of trucks that sold? Thanks

I have this 346 flathead. It was rebuilt during a full resto then I guess just left open. locked up and will need two sleeves for sure. I have the carb, front pulleys and idler, No exhaust. Has the 3 speed manual trans. and rear differential. The diff was out of another parts car. I don't know the gear ratio. I can bring it to a delivery service that can crate it. but you will have to find one here and willing to ship it all. $950.00 obo. i may separate the trans from the engine etc...I can ship Trans through Fastenal but you have to pick up at a local fastenal. I think the engine may be to heavy for them. I will trade for ford Flathead speed parts, 33 dodge grill, 33-34 ford grill, L83 LS 5.3L or ??? I am located in the Dallas Ft Worth Metro $950.00 obo. please call or text with questions etc... 469-358-4233

look on facebook market place. I see them on run stands at the big swaps! good Luck

Hello Looking for some front and rear fenders workable repairable is fine. Also a grill and shell decent steering wheel. Window cranks maybe a column. Lot of rust in mine and nothing is moving. Wind shield , side glass. Let me know what you have. I can weld and use back tail halves of fenders to correct mine. Thanks

How much do you need for it? Thank you!

ok Thank you

The one pictured is actually smaller which will not work with my windshield. Let me know if yours has the big gears on the outside. Thank you I wont need the fender.

I placed the two big gears on the outside of mine pictured and the pins measure just inside the windshield bracket. Which is about the same as pictured for the 27-28. The two gears would have to swing opposite of each other to work. Mine pictured they each swing one direction. I do have side brackets that would mount such a piece on each side of the windshield. How ever that may also mount those other gears for the 29-31. I believe someone thought this was for a Buick. He also was from Australia or England maybe from an imported Buick. I know they had imported Dodges in Australia.

THANK YOU VERY MUCH! THAT'S' IT!! The one I have the big gears are on the inside. Which makes it to small to fit in the windshield bracket.Maybe for a different year.

Hello I am looking the windshield crank assembly for a 28- 32. The windshield rolls up and down. Please send picture and price if you have one. Also do you have picture of the interior trim around the windshield. What were the interior A pillars made of wood or steel? Was there a window channel on the sides like a door has? Thank you!

Offers ? Thank you

That's all the pictures I could add at this time. Thanks would trade for a 1933 grill 57 bel air rear seat and interior

I have a original pair of front fenders. They have surface rust but very solid! No rot through They will tool out very nice! Not even welded at the usual spots. I will post pics soon or you can send me a text if you wish 469-358-4233 and I will send you the pics. I have shipped a few pairs via Grey hound and that seems to be the cheapest. $1250.00 Pair will not separate. Thank you

no engine parts left sorry

offers? Thank you

still have this if interested Offers considered! specs on lens are paint I believe

Open to offers or trades - I also have 33 bumpers, brake pedals, master cylinder, small parts for Trade. Looking for 33 Grill 31 wire wheel hub caps "dodge" Rad cap or Ram Rad cap

I have this single head lamp from what I was told is a 33 DB8 New Old Stock. The lens is a Concornan Brown TriBeam "LEFT" The lens has #1205 stamped on the glass ring area. I was told it was for a 1933 Dodge DB 8. This was purchased from a vintage headlamp test facility. This was never installed on a car. This does have shelf wear. The chrome has couple very small dings and light scuffing from handling for the past 80+ years. the ring screw still has the retainer and the spindle mount and plug are like new. I am not able to get the trim ring off to confirm the #1205. I can unscrew it and spin the trim ring but I do not want to force it off. The glass lens looks perfect but has spots or dust on the inside. if you have any questions please ask. Need measurements or better pictures etc... looking for a 33 grill and or shell and insert. I have bumpers listed and some other miscellaneous parts from a 33 Dodge for sale or trade. Also a 35 dodge truck grill for sale. $675.00 Shipped to lower 48 tracked and insured.

No 34 grills or steps- This is the only Truck Item I have The rest of my parts are from a 30 3w and a 33 sedan. Thanks Reg!

I have this original grill and insert as pictured. The body and grill are nice and solid no rot! As you can see the lower half is gone. The original grill is welded in but you should be able to remove it for restoration. This would be an excellent builder is you have a damaged top portion and or missing a grill insert. $675.00 OBO shipping will be about $80 PLEASE SEND ME A MESSAGE I NEVER GET INFORMED IF YOU POST ON THIS THREAD. will trade for 33 shell and insert. Other items 30 dodge differential will separate carrier and or axles etc.. 491 gears 33 dodge back sea top sedan Front and Rear Bumpers other miscellaneous stuff

I pulled the cover and ring gear ratio 491 #309938 - 2-5-30 Date. (the 3 is questionable in the # ) It all turns nice but the ring has one chipped tooth at the very tip and two have some small pits on back side. The pinion gear has two chipped teeth also at the large side of the gear. Looks like the bearing cage is split. But it all turns nice. I think it was restored in the 60's 70's the cover had a weld so maybe had some work done at one time. it would need new bearings and seals at least. One axle the wheel nut thread is half stripped. This has all the brake shoes etc.. PICS available from my phone

Ok I may pull the inspection cover soon.

This like a ford nine inch style carrier but the housing does have a back inspection cover. Let me know if you need pictures of the exterior assembly. Thank you

STILL Available