Terry R

Yes, you can place a reserve on an auction, but BaT keeps them confidential. Thanks for your interest.

FS --- Listed today on BringaTrailer.com

1966 Buick Riviera. How can I access the instrument panel gauge lights. They are very dim and I would like to replace them with LED's. Do you access the gauges by removing the dash pad? I don't see any screws for the dash pad. Does it just pop out? Thanks, Terry Richtmyer

Curti, Thanks much. Found their website. I'll call Monday. Terry

Thanks Viv, Superior out of business. No luck at SVF. Thanks for responding. Terry

WANTED: TOP IRONS FOR 1932 FORD PHAETON CONVERTIBLE. Either originals or repos. Any condition but useable or repairable is preferred. Terry Richtmyer, (305) 323-4689, buickgs@bellsouth.net. (FL)

Bob, Thanks for the clarification. Mine is a '33 with one upper and one lower spring. Do you know a source for these? Thanks, Terry

I am looking for 1932, 1933 Buick hood louver door springs. There are 2 different springs, one on the top and bottom of each door. Mine has 10 doors, 5 on each side of the hood, so 20 springs are needed. Does anyone know a source for these or know someone who may have some? They may be the same as other GM hoods which have doors, like Chevy, Cadillac, etc. Parts are for restoration of my 1933 50 Series Phaeton. Thanks, Terry Richtmyer (305) 323-4689

I am looking for 1932, 1933 Buick hood louver door springs. There are 2 springs, one on the top and bottom of each door. Mine has 10 doors, 5 on each side of the hood, so 20 springs are needed. Does anyone know a source for these? They may be the same as other GM hoods which have doors, like Chevy, Cadillac, etc. Thanks, Terry Richtmyer (305) 323-4689

Thanks, I'll do that and will try to give him a call.

Bob, I am trying to find '33 hood louver door springs. There are 2 springs on each door and mine has 10 doors, 5 on each side of the hood. Do you know of a source for these? Also, do you have a '33 radiator shell trim piece in excellent condition? Thanks, Terry Richtmyer (305) 323-4689

JG, I need a 1933 50 Series CENTER STRIP HOOD HINGE. it is about 42 Inches long. Thanks, Terry Richtmyer (305) 323-4689

Need the following trim molding for a 1966 RIV. Need front fender lower stainless steel trim molding, left and right. These are about 18” long and mount just above the rocker panel molding on the front fenders. 1966 and 1967 Riviera and Toronado are the same. They are held with 3 nuts on the back. Anyone have these? Any help with possible locations for these parts is greatly appreciated. Thanks, Terry Richtmyer Fort Pierce, Florida

Rocky, Beautiful RIV - great color. Thanks for the info, very helpful. Terry

Jason, Great. Thanks so much. Terry