What are you looking for at hershey this year?

[djr71]

I will be looking for 48 Packard sport sedan parts and a 1930-31 Dodge Fender Mount Wing Nut

[studeboy]

I am looking for a left rear fender and radiator splash guard for a Studebaker light six. Also door and trunk hinge maybe other parts too.

[Steve_Mack_CT]

The deal of the century on a nice MG T series or XKE Jaguar. Gas and oil smalls, factory shop manual or other trinkets for the SL. Catch up with some forum and other AACA friends.

[packards42]

i will have my 39-42 Packard Air Conditioner tags for sale. Attachment 156679Attachment 156680


GCH 42 leave a message grab a card

[BearsFan315]

We will be looking for Parts for our 1930 Chevrolet Universal AD - Canopy Express
Also looking for GREAT weather, and making some NEW Friends !!

My son & I have generated a Shopping List of Parts :-)

Should give us something to do while we are there

DESCRIPTION	DETAILS/ NOTES	PART No
CARBURETOR	CARTER RJH-05 150S	836300
CLEANER, AIR	AIR FILTER FOR CARBURETOR	864131
COIL	REMY 528B	362702
CONDENSOR, DISTRIBUTOR		826947
DISTRIBUTOR CAP	7 WIRE, SNAP ON CAP	822465
PLUGS, SPARK	SPARK PLUG AC PLUG No C87 18mm
POINTS, DISTRIBUTOR		816917
ROTOR, DISTRIBUTOR		816774
WIRES, IGNITION	SOLID COPPER, 1&6 14.25", 2&5 11", 3&4 8"
OUTLET, WATER	FROM ENGINE BLOCK TO RADIATOR TOP	836272
SENSOR, FUEL LEVEL	SENSOR WITH CORK FOR GAS TANK
CAP, RADIATOR	THREADED	358577
EMBLEM, CHEVROLET
HORN	HORN, WIRE, BUTTON, COMPLETE	815761
SWITCH, IGNITION	1.00" DIAMETER, COMPLETE W/ KEY	362857
WIRING HARNESS	COMPLETE UNIVERSAL WIRING HARNESS
BUSHING, MAST	MAST BUSHING W/ HOR WIRING	11837956
COVER, HUB - DISC WHEEL	COVERS HUB ON WHEEL N/T CAP & RIM	355772
TRIM, SHORT 9.25"	FOR CAB UNDER WINDOW
GROMMET, FIREWALL	FIREWALL GROMMET FOR CABLES & WIRES
GUAGE, FUEL	1.875" DIAMETER	362855
GUAGE, OIL PRESSURE	1.875" DIAMETER	858443
GUAGE, SPEEDOMETER	2.50" DIAMETER
GUAGE, WATER TEMP & AMP METER	2.50" DIAMETER	859340 w & 857053 a
CRANK, INTERNAL WINDOW
HANDLE, EXTERNAL DOOR
HARDWARE, INTERNAL DOOR HANDLE	HARDWARE FOR MOUNTING DOOR HANDLE
HINGES, DOOR (COMPLETE COMPLETE)	BOTH PARTS OF HINGE
PIN, DOOR HINGE	.245" DIAMETER x 1.812" LONG
TRACK, WINDOW	DRIVERSSIDE WINDOW TRACK
PAN, SPLASH	LEFT/ RIGHT SIDEENGINE SPLASH PAN	355201 & 355200
LATCH, HOOD (CLAMP & LOCK)	HOOD FASTENERS CANDY CANE (CAD - BLACK)	357093 - 357092
WELT, HOOD TO COWL	SEAL BETWEEN HOOD AND COWL
WELT, HOOD TO RADIATOR	SEAL BETWEEN HOOD AND RADIATOR

[auburnseeker]

I just finally got my 48 Plymouth Convertible running with new Whitewalls on Powder coated rims. Now I'll be looking for a Passenger side Door moulding for the outside, Mine is pretty dented up, I can straighten and polish stainless but this one is going to take alot of work. A pair of Sill plates/rubber mats, An NOS set of Hubcaps, A replated or NOS Chrome rear bumper, and a pair of good clean unpitted wiper towers as well as better dash chrome and an Oil pressure gauge. The cover for the master cylinder fill hole in the floor. Also the Plymouth plate for the top of the dash. Now that's asking alot!! As well as a few other tid bits.
Any leads??
Also the miller or Ammco tool for adjusting the brakes. That's a crazy way that Mopar designed them to be adjusted. My 36 Chrysler was simple. I think they went backward in 1937.

[1922 Buick]

Buick Enthusiasts,
I am looking for these two items and there is a reward if anybody happens to run across them. Please give me a shout at 650-534-6187. The first item is the Buick dash light, Book of Parts #36996 or even the base #36694 will do. This is the thin narrow dash light for models 45 and under, years 1918-1922. The second item is the double spare tire carrier, top right side of picture. Any help would be appreciated.

Sincerely,
1922 Buick
Jeff Kearney

[stock_steve]

Browsing fun & old car fellowship.

[brich2929]

Appleton fog lights and switch for my 1941 Cadillac 60 Special

[Jim Bollman]

Looking for things I didn't know I needed or didn't know existed.

[dalef62]

Jim,
I have everything that you don't know you need and even a few of those things that don't exist. Stop over, I am in the Green field GBC-8. Someone is usually there till about 4pm daily.
Dale

[namvetschrysler]

On the day when you are all shopping and looking for that elusive part for your old car i will be in bed fast asleep dreaming that i am there at Hershey and i have just found 4 real good 18 inch 6 stud hole wire wheels complete with chrome caps to suit my 1930 Chrysler model 66, then i will wake up and start crying.

all the best fella's hope you find what you are looking for

[Bhigdog]

Love, in all the wrong places.............Bob

[dnd55]

I am looking for a tail light bracket for the passenger side of a 28 to 31 Plymouth that bolts down by the shackle instead of mounting on the fender Thanks

[richasco]

On the day when you are all shopping and looking for that elusive part for your old car i will be in bed fast asleep dreaming that i am there at Hershey and i have just found 4 real good 18 inch 6 stud hole wire wheels complete with chrome caps to suit my 1930 Chrysler model 66, then i will wake up and start crying.

all the best fella's hope you find what you are looking for

If all goes well, I will be making a purchase from OldCarFan on Wednesday morning for the one major part that I need. That will leave me plenty of time and brain power to keep on the look out for a set of wheels for you.

[namvetschrysler]

Thanks Mate,
Next year all going well, saving my pennies i would love to go to Hershey myself, just for the atmosphere if nothing else

[Den41Buick]

I am looking for the clips for 1941 Buick elephant ears. Any help? Thanks

[packards42]

"Good on ya mate," I hope you mate it.

[cigarsmoker]

I am looking for an oil bath air cleaner for my 56 DeSoto Firedome 330 2V. Some gages, switches, and wall hangers.

John