Results 1 to 9 of 9
Buy/Sell - Chrysler Products Discuss 1948 Chrysler parts in the DOMESTIC MAKES & MODELS forums; Son is chopping a classic. 3 inches off the top and shaved handles. Parts are here in the North Pole(North Pole,AK 99705). See something you want/need email me at h.mccormick@us.army.mil ...
  1. #1
    Junior Member
    Join Date
    Jun 2012
    Posts
    8

    1948 Chrysler parts

    Son is chopping a classic. 3 inches off the top and shaved handles. Parts are here in the North Pole(North Pole,AK 99705). See something you want/need email me at h.mccormick@us.army.mil leave a posting, I'm interested in comments on the pieces.
    Attached Thumbnails Attached Thumbnails 1948 Chrysler parts-48-chrysler-parts.jpg   1948 Chrysler parts-car-032.jpg   1948 Chrysler parts-car-052.jpg   1948 Chrysler parts-car-080.jpg  
    Last edited by No Slack 95N; June 11th, 2012 at 23:24. Reason: add pics

  2. #2
    Senior Member TomTIII's Avatar
    Join Date
    Jan 2009
    Location
    Suffolk, VA
    Posts
    280
    Images
    1

    Re: 1948 Chrysler parts

    Hood ornament? Any interior plastic parts? Gas tank filler pipe with gas cap? Steering wheel? 11" Anco original wiper blades ?
    Everything I need is expensive, everything I have, nobody wants.
    '23 Buick 45 Touring
    '31 Ford SW Murray Sdn
    '32 Chevrolet 4 dr Sdn
    '48 Chrysler Bus Cpe
    '73 Jaguar XJ6
    '78 Fiat 124 Spdr
    and a bunch of junk

  3. #3
    Junior Member
    Join Date
    Jun 2012
    Posts
    8

    Re: 1948 Chrysler parts

    Quote Originally Posted by No Slack 95N View Post
    Son is chopping a classic. 3 inches off the top and shaved handles. Parts are here in the North Pole(North Pole,AK 99705). See something you want/need email me at h.mccormick@us.army.mil leave a posting, I'm interested in comments on the pieces.
    Tom, what 48 do you have? The kid's is a Royal 4 door. I have more pictures, and can send them to you. I can only post so much on the site. The hood ornament, steering wheel, and wiper blades(blades are not in the best shape so no cost and I think it will fit in one of the flat rate boxes you pay for the shipping) are here. Make an offer but remember we are in North Pole AK(99705) and it is costly to ship from/to here. I used the US. Post office site online to calculate a shipment for Jack in Oregon and it was the cheapest way to ship. As I mentioned I can send you more pics, but they are from my Iphone. They show some of the quality but it’s still a picture from a phone. Make a offer for the parts you want and check the postage from here to there. I want these parts to go to someone restoring/building a dream. We aren't going for high bid and honestly don't know what the parts are worth. I have searched the web(ebay,google,amazon) and it looks like people will take advantage of a dreamer so my young dreamer wants to help. >>
    > >
    Jack,>>
    I am still here, been out at Denali with Troop 250 trying to fatten the bears prior to the berries coming in. Send a picture of your car, and I see if my older boy can use his camera to take better pictures of those parts you want. You are horrible at negotiating a price, I went way high twice. Shoot a low ball shot back that is the back and forth. I found one on ebay but he is selling it in two parts. The grille I looked at the one here and it can come apart but it has more than two parts. The main part is two parts but then you have three chrome pieces that cover the full length side to side and then it has small chrome pieces that cover the center joints. So just looking at it, it seems to come apart into 8 pieces and then the side pieces (6: 3 on each side) attach to the side and are molded to fit to the grille

  4. #4
    Senior Member TomTIII's Avatar
    Join Date
    Jan 2009
    Location
    Suffolk, VA
    Posts
    280
    Images
    1

    Re: 1948 Chrysler parts

    From Tom:
    My email is ttallaniii@gmail.com... the above parts I listed are wants, I'm also looking for another radio. I have a '48 Royal Bus. Cpe... if the chrome on the center stop light is good, that's also of interest. An approximate weight of the parts I listed wil help in postage calculations. If you have access to regional rate box "B", it can save a lot.
    Tom 757-238-2984 (VA)
    Everything I need is expensive, everything I have, nobody wants.
    '23 Buick 45 Touring
    '31 Ford SW Murray Sdn
    '32 Chevrolet 4 dr Sdn
    '48 Chrysler Bus Cpe
    '73 Jaguar XJ6
    '78 Fiat 124 Spdr
    and a bunch of junk

  5. #5
    Senior Member JACK M's Avatar
    Join Date
    Jun 2007
    Location
    The GREAT NORTHWEST, OREGON
    Posts
    1,243

    Re: 1948 Chrysler parts

    OK, No Slack, I didnt want to insult you with a loball. I was concerned with the condition and I understand about the phone pics.
    I will gat back to you via Email with an offer and a pic of the car, Thanks.
    The Captain is in the house.

  6. #6
    Senior Member JACK M's Avatar
    Join Date
    Jun 2007
    Location
    The GREAT NORTHWEST, OREGON
    Posts
    1,243

    Re: 1948 Chrysler parts

    Offer submitted via email.
    The Captain is in the house.

  7. #7
    Junior Member
    Join Date
    Jun 2012
    Posts
    8

    Re: 1948 Chrysler parts

    Jack, I need an address to send the grille and 6 grille side extension. I was able to send Tom's parts to him for about a dollar a pound. I can send yours as soon as i get the address.

  8. #8
    Senior Member JACK M's Avatar
    Join Date
    Jun 2007
    Location
    The GREAT NORTHWEST, OREGON
    Posts
    1,243

    Re: 1948 Chrysler parts

    OK I will email it to you.
    I am not going to be around the computer much for the next few days.

    Happy Birthday America !!
    The Captain is in the house.

  9. #9
    Junior Member
    Join Date
    Jun 2012
    Posts
    8

    Re: 1948 Chrysler parts

    Tom
    The two priority boxes are at your PO. Tracking said they should be there for you to pick up

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. For Sale 1948 Chrysler Windsor Parts
    By 乇L乇ktrk in forum Buy/Sell
    Replies: 3
    Last Post: December 3rd, 2012, 20:43
  2. 1948 Chrysler Windsor parts
    By 42Dodger in forum Chrysler/Mopar
    Replies: 17
    Last Post: March 15th, 2012, 12:50
  3. For Sale 1948 chrysler straight eight parts
    By chevrolet in forum Buy/Sell
    Replies: 2
    Last Post: August 14th, 2011, 21:55
  4. Want To Buy 1948 Chrysler Windsor Convertible Parts
    By metalman in forum Buy/Sell
    Replies: 4
    Last Post: May 21st, 2011, 22:33
  5. Need Trim Parts for 1948 Chrysler Windsor Convertible
    By metalman in forum General Discussion
    Replies: 5
    Last Post: July 1st, 2010, 20:49

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •