Results 1 to 7 of 7
Our Cars & Restoration Projects Discuss any one use clip on mirrors? in the AACA GENERAL DISCUSSION forums; i have been looking at some mirrors for my 39 and considering the clip ons for the door.any drawbacks from these. thanks...
  1. #1
    Senior Member
    Join Date
    Feb 2009
    Location
    rhode island
    Posts
    145

    any one use clip on mirrors?

    i have been looking at some mirrors for my 39 and considering the clip ons for the door.any drawbacks from these. thanks

  2. #2
    Senior Member msmazcol's Avatar
    Join Date
    Feb 2009
    Location
    Chi Town, not too close.
    Posts
    841
    Images
    2

    Re: any one use clip on mirrors?

    Yes, I had to use a set on my Willys fire engine. When I bought the truck it had two west coast mirrors which were so wrong. They had done major damage to the doors. I was forced to try something different. I installed two door edge clips. They tend to not be super solid. You can only get them just so tight. Be sure you check for clearance in the door jamb area. They will leave some marks no matter how careful you install them so I would install them and live with them. On your Buick you may get a decent view down the side of the car. On my fire engine I can't see a damn thing. I will not back the truck up without a spotter. When we are sure we are done competing it I'll fabricate a better set of mirrors with the right reach. The big plus is you will not be boring any holes which you might regret latter.
    Good luck.
    Sorry I had a better photo but it is a higher quality and won't load.
    Attached Thumbnails Attached Thumbnails any one use clip on mirrors?-36786.jpg  

  3. #3
    Senior Member
    Join Date
    Feb 2009
    Location
    rhode island
    Posts
    145

    Re: any one use clip on mirrors?

    thanks i think i will go with them.beautiful fire engine,was that a brush truck or a front line truck when it was in service.

  4. #4
    Senior Member keiser31's Avatar
    Join Date
    Dec 2004
    Location
    Phoenix, Oregon, USA
    Posts
    14,790
    Images
    384

    Re: any one use clip on mirrors?

    The clamp on mirrors will be making a mark and possibly bow out the area at the door where it is mounted. And yes....they ALWAYS wiggle loose.
    1931 Dodge Brothers DH6 business coupe w/ wire wheels
    1931 Dodge Brothers DH6 business coupe w/ wood wheels (my 1st car and still have it)
    1967 Dodge A100 V8 compact pickup
    and visions of my past old cars

  5. #5
    Senior Member msmazcol's Avatar
    Join Date
    Feb 2009
    Location
    Chi Town, not too close.
    Posts
    841
    Images
    2

    Re: any one use clip on mirrors?

    Thanks,
    It was a front line pumper built for Woodville State Hospital long gone from Pa.
    Front mount Waterous pump is rated at 500 gpm.
    Yes it is fully operational.

  6. #6
    Senior Member
    Join Date
    Feb 2009
    Location
    rhode island
    Posts
    145

    Re: any one use clip on mirrors?

    that is the name of the section of towm im from woodville here in ri.my cousin has a few of the old timers here in town. on another note i will probably drill the holes for the mirrors and not use clip ons. thanks

  7. #7
    Senior Member
    Join Date
    Jan 2009
    Posts
    282

    Re: any one use clip on mirrors?

    MY DAD BORROWED A FRIENDS 41 CHEVY, SHORTLY AFTER HIS RETURN FROM WW II. HE PARKED THE CAR AND NOTICED THAT THE "CLIP ON" MIRROR WAS ON THE GROUND NEXT TO THE CAR. MY DAD REINSTALLED THE MIRROR AND RETURNED THE CAR. A FEW DAYS LATER THE OWNER SAID "HEY, WHERE DID YOU GET THE MIRROR?"

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •