[whalerman03]

Had them working.. now they will not open... 2 new relays.... headlight motor feels hot to touch... any ideas what to do/try next? Car is running, lights come on but visors do not open.....
Thanks!

[gungeey]

Well, 1st thing to do is see if it shut down due to the thrermal circuit breaker.2nd thing to do is disconnect the linkage and the two prong plug up under the bumper near the battery. See if it (the motor) energizes when you "hot wire it". If it didn't shut off with the limit switches , there's a good chance it sh!t the bed. happens quick. What you want to do is set up a toggle switch and some alligator clips so when you are installing, or adjusting it you can manually turn it on and fine tune those limit switches to stop in the rite spot. It can be an expensive learning curve, I'm afraid!

Have fun, Happy 4th, Steve

[whalerman03]

Thanks Steve.... some day I will look at this ... for now no night driving!
Cheers!
Bob