engine fan

[gboy]

I am looking for an engine fan for a friend, I have included two pictures to help identify. the diameter is 16 inches, the bult pulley about 2 3/4 inches

[D Binger]

Chuck,

Is that off of Ken's 10 CD ?

an

[gboy]

Dan
Sure is! I told Ken I would try to find a fan. How was your meeting, our's was interesting.

[D Binger]

Chuck,

I'll give you a call.

Dan

Can you send me a good picture of the fan hub ? I believe I may have the fan you are lookingfor . It came from the farm of a known multiple Chalmers owner .
Alan Maris Chalmers registry #56

[gboy]

I hope this picture will help, I am doing this for a friend

Chuck

Hi Gboy;
Close but no cigar. The total length of the hub is 4.0 .Fan pulley dia. is 3.6in. belt width 1.0 in. Construction is typical Chalmers but must be a little l
ater .early teens . It has an eccentric fan shaft for belt tension .

[gboy]

we tried that's the best we can do, I have one coming, let's hope it will work, if not I will be getting back with you soon.

thanks

[imported_oldmitchell]

That looks like the fan on my 1914 model 24.