Need vlave springs

[DeSoto701]

Need help in finding replacement valve springs for a 29 Desoto Model K with a 175 cu in engine. Thank You Wally

[1930]

Post the part number

[keiser31]

Check out the number GT-40 under "Valve Springs" to see the other models with the very same springs.....(click on each image three times to enlarge.

[DeSoto701]

According to the chart; the number I need is GT-34 and the part # out of the Desoto parts book is 306538. If anyone has any info on the height, width and how many pounds at the install height and when the valve is open; it would be greatly appreciated. Thank you all.

[DeSoto701]

According to the chart; the number I need is GT-34 and the part # out of the Desoto parts book is 306538. If anyone has any info on the height, width and how many pounds at the install height and when the valve is open; it would be greatly appreciated. Thank you all.

Found another part # VS 180

[keiser31]

According to the chart; the number I need is GT-34 and the part # out of the Desoto parts book is 306538. If anyone has any info on the height, width and how many pounds at the install height and when the valve is open; it would be greatly appreciated. Thank you all.

So sorry....my eyes are going bad.

[1930]

According to the chart; the number I need is GT-34 and the part # out of the Desoto parts book is 306538. If anyone has any info on the height, width and how many pounds at the install height and when the valve is open; it would be greatly appreciated. Thank you all.

Hopefully this is what you need, if not let me know and Ill see what else I can dig up

[DeSoto701]

Thank You all for your input. might have some used springs available. Was hoping someone had came up with a subsitute, also.