LinkBack URL
About LinkBacksHow do I pull the rea axle shaft
How do I pull the rea axle shaft
Wrap your hands around it, arch your back and sorta lean backward, you will feel a strain on your fingers and it is with this strain that you will know you are pulling it.
Last edited by 1930; May 19th, 2012 at 19:41.
____________
Jason Anderson
Looking for early Dodge Bros/Desoto/Plymouth/Chrysler/Fargo/Maxwell Tool info, primarily 14-38
Looking to share any early Graham/D.B truck info, lets swap info
If you really want your car to be unique restore it back to original
4 cyl tech advisor in training
Lifes too short for a dog and pony show
Forgive the criminal but not the crime; if you rod a car you should do time
Do you have a book of information for the car? Pullin the rear axle is much like any other car, maybe try and be more specific on what you are having problems with.
I would be more than happy to find the secific information you are needing, are you trying to replace the axle?
BTW, I see its your first post, welcome and would you share pictures and a little history of your car, lots of nice people here that would enjoy seeing what you have.
Last edited by 1930; May 20th, 2012 at 07:28.
____________
Jason Anderson
Looking for early Dodge Bros/Desoto/Plymouth/Chrysler/Fargo/Maxwell Tool info, primarily 14-38
Looking to share any early Graham/D.B truck info, lets swap info
If you really want your car to be unique restore it back to original
4 cyl tech advisor in training
Lifes too short for a dog and pony show
Forgive the criminal but not the crime; if you rod a car you should do time
Are you trying to pull the rear hub off?
I remember dad saying he had trouble getting the rear hubs of our 1930 Desoto 8 Sedan.
He ended up making a big puller from a piece of plate to get them off.
Cheers
Stewart
1930 Dodge DC8 Roadster
1930 Desoto CF8 Sedan
On 31DH put nut back on axle after pulling hub and take backing plate off wrap 5/16 or 3/8 logging chain around axle and with about 1ft slack snap the chain a few times and the axle came out.
If you are changing bearings there is a ridge between bearings on the axle and need to take bearing of each end of axle. Good luck.
NO I will not rod the 1930 DC8
No the axle shaft have puller for the hubs
That is a nice car you have there mate!
Cheers
Stewart
1930 Dodge DC8 Roadster
1930 Desoto CF8 Sedan
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote