Results 1 to 2 of 2
Technical Discuss 1961 3 speed trans in the AACA GENERAL DISCUSSION forums; Hi All and thanks in advance for any info you can provide. I have a 61 88 with the hydro 3 speed trans. It seems to work fine but spitts ...
  1. #1
    Junior Member
    Join Date
    Mar 2007
    Location
    Oregon
    Posts
    9

    1961 3 speed trans

    Hi All and thanks in advance for any info you can provide. I have a 61 88 with the hydro 3 speed trans. It seems to work fine but spitts trans fluid out the dip stick tube. Is this a normal issue with this trans as I have been told and/or is a fix available? The car has the stock 394 and trans.
    95 Aurora
    84 Hurst Olds
    78 Toronado
    77 Supreme (two)
    75 Hurst W30
    75 Supreme
    68 Cutlass Supreme
    65 442
    67 442
    61 Dynamic 88
    91 Allante' (how did that get in there?)

  2. #2
    Senior Member
    Join Date
    Sep 2006
    Posts
    4,734

    Re: 1961 3 speed trans

    Check the fluid level with the engine hot and running. If you checked it cold it could be overfilled, the level comes up quite a bit once the trans warms up.

    There is supposed to be a rubber plug or baffle near the top of the dipstick to prevent spitting.

    Also you could check the vent is not plugged up. There may be a vent on top of the trans, at least some transmissions have them, not sure about your Jetaway.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •