Build Sheet Decoding Service

[imported_Duane-Heckman]

To everyone,
I have been decoding build sheets for certain models of Buick Gran Sports for years. With the interest in Build Sheets increasing, I put together a Build sheet decoding order form. It lists all the sheets I currently do and the ones I am working on. It also lists the information I need and the prices for the service. I do not charge much, but need to offset the cost of Ink, Paper, Mailing, and my time.
I offer this service to all Buick owners, whether they belong to the BPG, BCA, GSCA, or have no club affiliation. I look at these sheets as automobile historic documents and anything I can do to help a fellow Buick owner learn about his car is fine with me.
Please remember that these sheets were typed in a computer by human beings, mistakes occur. I decode what the sheet says, that?s all! I make no promise that your car was built to these specifications. Enough said.
I am attaching the form to this letter, hope this helps you.
Thank you for your interest. Duane Heckman



BUILD SHEET DECODING ORDER FORM

For Skylark & GS (A-Bodies) only

Build Sheets from the Flint Production Plant
Description Prices
1968 Production Order Body Final (POBF) $20.00
1968 Production Order Chassis Paint (POCP) $20.00
1969 Production Order Body Final (POBF) $20.00
1970 Production Order Body Final (POBF) $20.00
1970 Body Shop Inspection (BSI) $20.00
1971 Production Order Body Final (POBF) $20.00
1971 Production Order Chassis Paint (POCP) $20.00
1971 Body Shop Inspection (BSI) $20.00
1972 Production Order Body Final (POBF) $20.00
1972 Production Order Chassis Paint (POCP) (Early) $20.00
1972 Production Order Chassis Paint (POCP) (Late) $20.00

Build Sheets from other Production Plants
Description Prices
1968 Large Build Sheet (LGBS) $40.00
1969 Large Build Sheet (LGBS) $40.00
1970 Large Build Sheet (LGBS) $40.00
1971 Large Build Sheet (LGBS) $40.00
1972 Large Build Sheet (LGBS) $40.00
Note; if you want the UPC codes also decoded for the (LGBS) sheets, there will be an extra $10.00 fee charged, and you will receive a second decoded sheet.

What you will receive back (Via Snail Mail) is a nice representation of the original Build Sheet that can be displayed at shows. In large Red letters across the middle of the sheet will be the word ?REPRODUCTION? and a warning of the same at the bottom. On the reverse side will be a list of the codes along with the decoded information.

I also decode the following Build Sheets for all Production Plants.
Description Prices
1968-1972 Protect-O-Plates (POP) $15.00
1970-1972 IBM Cards (IBM) $20.00
Also
1970 & 1972 Sloan Information Packets $15.00

What you will receive back (Via Snail Mail) is a list of the codes along with the decoded information in an easy to read format.

Disclaimer: I decode only Original Build Sheets. This does not mean your car was built in accordance with these sheets, I have found errors in the past. Also I will not create a Build Sheet for a car, so don?t even ask.

Items NEEDED to be included with the order. (Via Snail Mail Only)
1. Full Name
2. Address
3. Phone # (With times to call, in case I need to ask a few questions.)
4. Fax # and/or E-Mail Address (If applicable)
5. Paper copy (Not Original) of Original Build Sheet (Cleanest Untouched Paper Copy) (Fax and/or e-mail copies are often too hard to read) (Clean e-mail copies can be sent in addition to the paper copies if available.)
6. If needed a Second copy, with the codes ?Inked in? to make them more legible.
7. Full Vehicle Identification Number
8. All information from the Fisher ID Plate on the firewall
9. Check made out to:

Classic Car Interiors
120 President Ave.
Rutledge, Pa. 19070
Tel # (610)-544-6776

[caGSxlr8]

Duane decoded the build sheet for my '68 GS400 and it yeilded some very interesting information. If you ever wanted to know what all of those codes are on your build sheet this is your chance to find out. Duane did a great job and I am very pleased with his work.

Mike Trom
68 GS400 Convertible