Transmission Lines

[imported_BuickCollector]

Are the transmission lines are still available for a '91?
Are these shared with the Riv?

I had a line burst (what a mess)... it separated where the solid metal line meets the hose at the bottom of the rad. support.

Before I cut it put in a temporary fix to get me back on the road on Monday, I thought I'd ask if new lines are still available since there is a local shop which can replace the hose portion with braided line (but only if the original line is intact) and if I can't get any new lines, I won't cut the originals.

Thanks in advance

[imported_BuickCollector]

Success!

Cut the OEM solid lines.
Flared the ends.
Slipped a trans. cooler hose over the solid lines.
The flared ends tended to slice the hose, so....
Cut off the flared ends and cleaned the tubing.

Slipped a trans. cooler hose over the solid lines.
Double clamped each end (did not use worm clamps).

Refilled trans. w/8 quarts of fluid.

Car moves and no leaks.....(at least, not yet).

[BobbyBubba]

I have seen before- a tool that acts like a "spreader"- and puts a "lump" in a metal line- as many as needed- so clamp won't creep off.Flange Spreader