Shifter tape replacement

["TACOMA"]

I am replacing the shifter vinyl on my 1990 Reatta. I have the instructions posted by Mark W (Posting# 448985) but cannot find the basic console removel instructions he refers to (Posting # 391258. Doing a search brings up a blank. Does anyone have instructions on removing the armrest and basic console. Thanks

[mongeonman]

Having fun?

["TACOMA"]

Sorry, As I was trying to add this post it kept giving me an error message that I hadn't filled in all the blocke and as I hit the back button I couldn find out what I was missing. Never had this problem with the old format

[Vincent Vega]

yeah right....... Just kidding, really. ;-)

[nic walker]

YUP! I get the same darned message back...really "aggrafretting"....

On the instructions for the R & I ....the young man that did the tutoral so well was CL Reatta. I am not sure how he wrote his forum "handle", but perform a name search under different varitions of CLREATTA and you should come up with his threads.....in fact, I think he has just returned...check the posts in the last few days to a week for that name....hope this helps.

Nic

[nic walker]

here it is [img]<>/smile.gif[/img] :

Hi again everyone...i'm back by CL_Reatta
0 69 06/17/07 09:39 PM
by CL_Reatta


search for the tutorial under his name/handle "CL Reatta"

[Nick_Michels]

I would like to replace my shift tape also. And I need to clean the film for the poopoo indicator.
I have all the top trim pieces out. How does the shift indicator block come apart? I can not find any notes on this in the Buick shop manual.

Thanks in advance.

Nick

[Ronnie]

Quote:

I would like to replace my shift tape also. And I need to clean the film for the poopoo indicator.

You might need to call Roto-Rooter for help on this one. [img]<>/laugh.gif[/img]

Sorry that I can't be of assistance on taking the block apart.

[nic walker]

Do a name search for :

"Mark Kuklok" for an absolutely fantastic tutoral on the restoration of the shifter assembly.

"CL Reatta" for an exceptional tutoral on the removal and installation of the shifter assembly.

Good luck [img]<>/smile.gif[/img]

[Nick_Michels]

Nic,
I tried both names in the search section and it comes up with Zip!

Any other suggestions?

Thanks

Nick

[Ronnie]

Nick,
I believe what you are looking for can be found here:
Replacing The Gearshift Selector Vinyl on 90 & 91's

[nic walker]

TDMan,

Thanks for the help...can you also see if you can do the same for the folks by pulling up the "CL Reatta" tutoral on the R & I of the shifter mechanism...really good tutoral (I am not that savvy with computers and/or especially the search function on this forum). Thanks, Nic

[Ronnie]

No luck finding the tutorial on the shifter mechanism. I did find this:
Shifter tape tutorial #2

The search engine on this forum is very clumsy. Each time you search you must make sure you have the correct forum selected in the box on the left, enter your keyword and then set the Date Range to: New Than 5 Years to get good results.

Glad to help.

[nic walker]

Thanks TDman [img]<>/smile.gif[/img]...appreciated.

1st tutoral is on 88-89 models, and 2nd tutoral is on 90-91 mosels.

I just tried to find the Remove and Install Tutoral and can't get anywhere....I find the darn search funchtion impossible at times darnit.

This tutoral was created by CL Reatta....can someone try "CL Reatta" (name search) please?

[Nick_Michels]

Thanks TDman!

The tape replacement post is great. But, the link - "There is an excellent tutorial on removing the selector here: http://forums.aaca.org/showflat.php?...ue#Post391258" - does not work. What I need to know is how to get the darn shift selector unit out of the car.
Thanks again,

Nick

[Ronnie]

I searched again with no luck.

His user name is actually CL_Reatta (note the underscore) To see all his posts by searching, leave the keyword blank, enter CL_Reatta in the "Display Name Search" box and set the time to 5 years as described above.

[nic walker]

Thanks TDman the "_" worked....HOWEVER only went back 8 pages [img]<>/frown.gif[/img]...I wrote CL_ Reatta a PM...hopefully he will answer. The removal of the console is a little tricky if I remember correctly and it would be nice to have this tutoral.

[Nick_Michels]

I still can not get the search function to give up any info.

"I wrote CL_ Reatta a PM...hopefully he will answer." I will wait and see if you get a answer from your PM inquiry Nic.

Nick

[nic walker]

Nick...see the post on the search function.

The post we are looking for was submitted to the forum on 07 04 06

Nic

[CL_Reatta]

Hi guys sorry about the slow responses...ive got a lot going on around here, had family visiting from Ontario over the weekend. the link for my center consol replacemnt is http://forums.aaca.org/ubbthreads.ph...rue#Post361595 dunno if this helps?

[Nick_Michels]

Thanks CL!

I removed every thing and cleaned out the shifter box and re-painted some parts. Also, shampooed and cleaned the console. But, I am going to need a new shift indicator plate for the shifter box. The owner before me had spilled some kind of a drink (cola?) on the console and it leaked into the box. Ever thing cleaned up well except that the some of the lettering on the indicator plate came off.

Thanks again,

Nick

[nic walker]

Nick,


You can rebuild the box and Mark Kuklok is responsible for the grand tutoral on the topic....try to find it on the forum (he has two...one for 88-89 and one for 90-91 models .

If damaged beyond repair, Jim Finn may still have some used ones available... jfinn@cpinternet.com

I will be attempting all of this soon as well....

[Vincent Vega]

I have some strips of what I think is a reasonable replacement. I have sent a couple out. One flat(unfolded), one folded(tacoma i think). Want one?

[Nick_Michels]

Vincent,

Thanks for the offer!
But, I decided to go "commando" and just use the naked stainless steel band.
I will post some pics after I get home.

Thanks again,

Nick