http://forums.aaca.org/ en Sat, 21 Nov 2009 05:39:12 GMT vBulletin 60 http://forums.aaca.org/styles/aaca/misc/rss.jpg http://forums.aaca.org/ http://forums.aaca.org/f196/eaton-air-compressors-quality-feedback-272311.html Wed, 18 Nov 2009 15:08:26 GMT I am ready to bite the bullet :( and buy a compressor and blast cabinet. After doing considerable research, it seems Eaton has the best compressors... I am ready to bite the bullet :( and buy a compressor and blast cabinet. After doing considerable research, it seems Eaton has the best compressors for the money. Advertised low RPM, quiet, most CFM per HP and best warranty at 5 years bumper to bumper. I am looking at the Eaton 5HP 80gal or the Champion 5HP 60 gal that TP Tools sells.
Does any have experience with Eaton Compressors? Even though on paper they look to be at the top of the list, I'd like to hear from someone who has one.

I'm going to TP Tools in Canfield OH on Black Friday for the big sale to get the Skat 976 Pro cabinet and will try to see if I can negotiate additional discount if I buy the Champion compressor at the same time. If no further discount, I plan to order this Eaton.

Eaton 5 HP,2 Cylinder,80G Air Compressor Fully Packaged - eBay (item 400085816891 end time Nov-19-09 06:08:26 PST)

5 HP, 2-Stage Champion Centurion Series - TP Tools & Equipment

Thanks is advance for any feedback ]]> JZRIV http://forums.aaca.org/f196/eaton-air-compressors-quality-feedback-272311.html http://forums.aaca.org/f196/transport-2010-grand-nationals-nc-272230.html Tue, 17 Nov 2009 01:57:44 GMT Are you going to attend the 2010 Grand National Meet in N.C and have space in your closed trailer for an extra car? I'd like to attend but rather not drive my 77 Grand Prix down from the Phila. area to the show. Can help towards expenses, gas, tolls, ect. ]]> mikes77gp http://forums.aaca.org/f196/transport-2010-grand-nationals-nc-272230.html http://forums.aaca.org/f196/storage-options-272136.html Sun, 15 Nov 2009 17:39:25 GMT I am new and "green" at this and asking for help! I am in the process of having a 1935 Ford restored, and am building a new garage. My question is: would it be reasonable to store the car in an enclosed trailer equipped with air conditioning and heat, and parked in a drive through shed - or would it be better to create a separate enclosed area in the garage? The car tires will be resting on, and secured with over-the-tire bonnets to a flush-with-the-floor E-Track system. I will have access to the driver side door through an escape door on the trailer. ]]> 1thomy2 http://forums.aaca.org/f196/storage-options-272136.html http://forums.aaca.org/f196/garage-organization-272032.html Fri, 13 Nov 2009 15:26:03 GMT Hi- my garage has gotten out of hand, parts piled there, tools piled here, need to get it organized. Does anyone have suggestions about cabinets,... Hi- my garage has gotten out of hand, parts piled there, tools piled here, need to get it organized. Does anyone have suggestions about cabinets, workbenches, etc.? I don't want to build my own, want to buy something and install, have been to Lowes and Home Depot and see all sorts from metal to plastic to fiberboard.

thoughts on the best way to go? thanks David Coco ]]> trimacar http://forums.aaca.org/f196/garage-organization-272032.html http://forums.aaca.org/f196/need-1931-ford-moved-fromsanta-ynez-271546.html Wed, 04 Nov 2009 21:12:38 GMT I just purchased a 1931 Ford 2 man seater race car. It weighs about 1,300 pounds. It is located in Santa Ynez,Calif. zip code 93460. I need it moved... I just purchased a 1931 Ford 2 man seater race car. It weighs about 1,300 pounds. It is located in Santa Ynez,Calif. zip code 93460. I need it moved to Ocala,Fla. zip code 34471. I want to get it moved by enclosed trailer for $1,200ish. Yes I know thats under market.However its ok for it to be part of a larger load,to help make expenses. Please email or call me if interested. Leads of haulers making this run from Calif to Fla. appreciated. Thanks,George Albright,Ocala,Fla. email; gnalbright@gmail.com cell 352 843 1624. ]]> George Albright http://forums.aaca.org/f196/need-1931-ford-moved-fromsanta-ynez-271546.html http://forums.aaca.org/f196/55-gallon-drums-boston-dallas-271248.html Fri, 30 Oct 2009 15:25:56 GMT I need two 55 drums of steam cylinder oil moved from the Boston area to Dallas. This is special oil used by Stanley Steam Cars. These drums... I need two 55 drums of steam cylinder oil moved from the Boston area to Dallas. This is special oil used by Stanley Steam Cars.

These drums probably weigh about 500 pounds each and could easily fit on a trailer in front or behind a car.

I also need two drums moved from Boston to Clarksville, MD (between Baltimore, MD and Washington, DC).

Thanks very much!

Don Hoke
www.vintagesteamproducts.com ]]> 1925Stanley http://forums.aaca.org/f196/55-gallon-drums-boston-dallas-271248.html http://forums.aaca.org/f196/need-engine-moved-271228.html Fri, 30 Oct 2009 01:43:16 GMT I will need a V-8 engine moved from Pittsburg, Pa to New Hampshire, or close sometime soon. It is on a wooden dolly with wheels and has an engine... I will need a V-8 engine moved from Pittsburg, Pa to New Hampshire, or close sometime soon. It is on a wooden dolly with wheels and has an engine hoist to load it, so it should be an easy load, and I have a hoist to unload it. It weighs about 800 pounds.
Thanks; Jim Stamper dstamp4@comcast.net ]]> jim43 http://forums.aaca.org/f196/need-engine-moved-271228.html http://forums.aaca.org/f196/car-hauled-milw-cinci-270977.html Mon, 26 Oct 2009 15:29:59 GMT Looking to have car hauled from Milwaukee to Cincinatti area, open or closed trailer car runs/drives------------ move is put on hold temporarily... Looking to have car hauled from Milwaukee to Cincinatti area, open or closed trailer car runs/drives------------ move is put on hold temporarily thanks ]]> 07 HD http://forums.aaca.org/f196/car-hauled-milw-cinci-270977.html